Manual

6
111 B
112
114
113
111 A
111: Ensure that the MT Solar leering is upright, and aach one of the 2x3” rectangular tubes to the
2.5” pipe and 2” pipe using the 1/2” x 3 1/2” bolts with 1/2” at washers and split washers.
112: Install the remaining 2x3” rectangular tube. Snug up all 4 bolts, but leave loose enough to allow for
some play when installing Angle pieces. Adjusng the Screw Adjuster as necessary, level the array in
preparaon for the installaon of the 2” x 3” angle.
113 B
113: Install the rst two 3x2 Angle secons to the 2x3 Tube using the 1/2" x 1 1/2” bolts, at washers and
split washers. Use the 1/2” x 1 1/4” bolts and 1/2” ange nuts to splice the two angle secons together.
114: Install the second two 3x2 Angle secons but DO NOT TIGHTEN at this step.