Manual

5
112 A
113
112 B
112: Install the rst two 3x2 Angle secons to the 2x3 Tube using the 1/2" x 1 1/2” bolts, at washers and
split washers. Use the 1/2” x 1 1/4” bolts and 1/2” ange nuts to splice the two angle secons together.
113: Install the second two 3x2 Angle secons but DO NOT TIGHTEN at this step.
114 A
114 B
114: Standing on the North Side of the array with the Tube to Angle bolts started but not ghtened,
sight the Angle pieces to ensure they are parallel. If not, twist the array unl they are then ghten the
bolts between the Rectangular Tubes and the Angle.