Manual

4
107
109
108
110: Ensure that the MT Solar leering is upright, and aach one of the 2x3” rectangular tubes to the 2”
pipes using the 1/2” x 3 1/2” bolts with 1/2” at washers and split washers.
111: Install the remaining 2x3” rectangular tube. Snug up all 4 bolts, but leave loose enough to allow for
some play when installing Angle pieces. Adjusng the Tilt Adjuster as necessary, level the array in prepa-
raon for the installaon of the 2” x 3” angle.
110
107: Slide one of the 2” pipes through the lt adjuster and the other 2" pipe through the U Bracket
Assembly sleeve.
108: Center pipes in sleeves. There should be equal length of pipe on either side of the sleeve.
109: Slide collars on 2” pivot pipe and ghten with 1/2” x 1” square head set bolts. Hold collar rm
against the sleeve when ghtening.
111