Manual

2
Thank you for choosing MT Solar Pole Mounts.
It is the installer’s responsibility to determine foundaon parameters based on local site condions, such
as wind speed, snow load, soil type, exposure category, etc. Installaons also must comply with local
building regulaons and requirements.
We recommend consulng an engineer for a recommendaon on foundaon dimensions and pipe size and
thickness. MT Solar can also provide a stamped drawing engineered for site-specic requirements for an
addional fee. Please contact us to nd out more.
Tips for Convenonal Pipe Installaon:
 Dig hole according to recommended depth and diameter.
 Set pipe in hole and use a level to ensure it is plumb and vercal to the ground.
 If installing mulple poles, use a string to line up pipes.
 Brace pipe to prevent it from moving while pouring concrete.
 Proper compacon of backll around sonotube or form is recommended, unless pouring so that con-
crete is in direct contact with the soil.
 Allow concrete to cure for recommended length of me.
Tools Required:
 3/4” Socket
 9/16” Socket
 Crescent Wrench
 Torque Wrench
 Tape Measure
 Angle Finder
 Compass
 Ladder