Installation Manual 2” Series Top of Pole Mount www.mtsolar.us 844-MT-SOLAR (687-6527) 2016 V2.
Thank you for choosing MT Solar Pole Mounts. It is the installer’s responsibility to determine foundation parameters based on local site conditions, such as wind speed, snow load, soil type, exposure category, etc. Installations also must comply with local building regulations and requirements. We recommend consulting an engineer for a recommendation on foundation dimensions and pipe size and thickness.
Installation Guide 102 101 101: With the 2" Sch 40 pipe installed in the ground, slide the pole cap over the pipe. 102: Tighten the set bolts in the back of the pole cap. 103 104 103: Slide the 2” Pipe into the Pole Cap Sleeve. 104: Tighten the set bolts in the Pole Cap.
106 A 105 106 B 105: Attach the Rail Adapters to the ends of the 2” Pipe and tighten. 106: Line up the bottom slot on the aluminum rail with the holes in the rail adapter. Slide stainless hardware into the slot and tighten. 107 B 107 A 107: Attach aluminum rails to the rail adapter . Install Solar Modules as per Mounting Rail and module manufacturer instructions using top clamps.
