Operation Manual

Connection steps˖

* Make sure that the power of the LCD-TV is off;

* Connect an antenna cable (CATV) to the corresponding interface connector

ȍ ANT) on the back of the LCD-TV. Connect the other end of the antenna cable to

the antenna connector on the wall or on your digital cable / satellite receiver.

Now you are able to view regular cable TV;

* Turn on the power of the LCD-TV;

* Press the INPUT button to set the video input mode of the LCD-TV to “TV”

mode. The channel number appears in the top right side of the screen;

* When channels are not programmed a blue screen will appear with go around

white screen with the text “TV-NO SYNC’’.

On the LCD MENU you can read how the channels can be programmed

(auto search or manual search).

It is recommended first to let the channels automatically to be searched.

* You can use key CH + / CH- button or the number keys on the remote control to

select the channel you want to watch;

(D) Connect with SCART signal

1. Scart input.

2. DC 12V power input.

Connection steps:

* Read the user guide supplied with your AV devices and ensure that it has a scart

connector;

* Make sure that the power of the LCD-TV is off;

* Connect a SCART cable to the corresponding interface connector on the back of the

LCD-TV;

* Turn on the power of the LCD-TV;

* Press the INPUT button to set the video input mode of the LCD-TV to “SCART” mode;

E 9