Operation Manual

English
15
Personalize the handset
6.5 Automatic answer
When there is a incoming call and the handset is on the base, the phone automatically takes the
line when lifted. This is the default setting, but can be set off:
6.6 Reset the handset
It is possible to return the phone to the original default configuration. This is the configuration
which was installed when you first received the telephone.
To return to default settings:
Default parameters are:
Low battery beeps On
Out of range warning beeps Off
Key click On
Auto answer On
Internal melody 1
Internal volume 3
External melody 3
External volume 3
Ear volume 3
Phonebook Empty
Call log list Empty
Redial list Empty
Pin code 0000
Dial mode DTMF
Keypad lock Off
6.7 Keypad lock
The keypad can be locked so that no settings can be changed or no telephone number can be dialed.
The -icon will appear on the screen when keypad is locked.
Locking the keypad
Unlock the keypad
1 Enter the menu.
2 Select “HANDSET” and confirm.
3 Select “AUTO ANSWER” and confirm.
4 Select “ON” to activate or “OFF” to deactivate and confirm.
1 Enter the menu.
2 Select “SETUP” and confirm.
3 Select “DEFAULT” and confirm.
4 Enter the 4 digit PIN code (default =0000) and confirm.
Returning to default settings will delete all entries in the phonebook and call log.
The PIN code will also be reset to 0000.
1 Press and hold the ‘ ’ key for 3 seconds. The keypad will be locked.
1 Press any key, “PRESS ” will appear on the screen.
2 Press the ‘ ’ key within 3 seconds.