Operation Manual

Connecting the base

1. Plug the telephone line cord into the socket marked on the underside of the

base.

2. Plug the power adapter connecter into the socket marked

on the rear of the

base and plug the other end into the mains power wall socket. Switch on the

mains power.

Installing and charging the handset

1. Remove the battery cover from the back of the handset and insert the

2 x AAA NiMH rechargeble batteries supplied. Please note the ‘+’ and ‘-’

markings inside the battery compartment and insert in the correct direction.

Press

down

Slide

2. Slide the battery cover back into place.

3. When charging the batteries for the first time, place the handset on the base to

charge for at least 24 hours continuously.

4. When the handset is fully charged, icon will appear steadily on the display.

Plug the other end of the telephone line cord (make sure that one end is already

plugged into the base) into the telephone wall socket.