Operation Manual

21
2. Scroll Down to « KEYLOCK ? » and press Menu to confirm. icon is
displayed.
Note: To unlock the keypad, press any button on the keypad, then press
*
within 5
seconds.
6. Base settings
6.1 Base ringer volume
Choose from 5 volume levels or Off.
1. Press Menu, scroll Down to « SETUP » and press Menu.
The display shows « BASE VOLUME ».
2. Press Menu.
3. Press Up or Down to select the volume (1 - 5 or « OFF »).
4. Press Menu to confirm or Phonebook to return to the previous menu.
6.2 Base ringer melody
Choose from 5 different base ringer melodies. While scrolling a sample ring will be
heard for each melody.
1. Press Menu, scroll Down to « SETUP » and press Menu.
2. Scroll Down to « BASE MELODY » and press Menu.
3. Press Up or Down to select the ringer melody (1 - 5).
4. Press Menu to confirm or Phonebook to return to the previous menu.
6.3 Change base PIN code
Some functions are protected by a 4 digit PIN code which must be entered if the
settings are changed. The default PIN is 0000. The PIN can be changed to a
preferred number.
When entering a PIN, the digits are shown as ****.
1. Press Menu, scroll Down to « SETUP » and press Menu.
2. Scroll Down to « PIN CODE » and press Menu.
3. Enter the 4 digit PIN code (default = 0000) and press Menu.
4. Enter a new 4 digit PIN and press Menu.
5. Re-enter the new PIN again and press Menu to confirm.
IMPORTANT
If the PIN code is changed, please keep a record of the new number.
6.4 Dial mode
The phone is set to tone dialling. The dialling mode should only need to change if
connected to an older type of switchboard/PABX which requires Pulse dialling.
1. Press Menu, scroll Down to « SETUP » and press Menu.
2. Scroll Down to « DIAL MODE » and press Menu.