Operation Manual

15
End a call
Press End Call, or place the handset back on the base or charger.
Receive a call
When an external call is received, the phone rings and icon ashes on the
display.
1. Press Talk to answer the call, or simply lift up the handset to answer the call.
Note: To answer calls by pressing Talk even when the handset is lifted, switch Auto
answer off, see page 19.
3.3 Adjust the earpiece volume
During a call, press Up or Down to increase or decrease the volume.
3.4 Mute
The handset can be muted so that a conversation can be held without the caller
hearing.
1. During a call, press Menu. The display shows « MUTE » and the caller cannot
hear.
2. Press Menu again to resume the call.
3.5 Intercom
Make an internal call
If more than one handset is registered to the base, internal calls can be made
between two handsets.
icon is displayed to indicate an internal call.
1. Press Int followed by the number (1-5) of the handset that is to be called.
Receive an internal call
When an internal call is received, icon ashes and the handset number that is
calling is displayed.
1. Press Talk to answer the call.
Transfer a call
To transfer an external call to another handset registered to the base.
During an external call:
1. Press Int followed by the number (1-5) of the handset the call is being transfered
to.
2. When the other handset answers, press End Call to complete the transfer.
Note: If there is no answer from the other handset press Int to return to the external
caller. The external call resumes automatically after 30 seconds if there is no answer.