Operation Manual

13. General information

IMPORTANT

This equipment is not designed to make emergency telephone call when the power

fails. Alternative arrangements should be made for access to emergency services.

This product is intended for connection to analogue public switched telephone

networks and private switchboards in Syria, Jordan and Lebanon.

Safety and Electromagnetic Interference/Compatibility information

. Use only the power supply suitable for this product range. Using an unauthorised

power supply will invalidate the guarantee and may damage the telephone.

. Use only the approved rechargeable batteries supplied.

. Do not open the handset (except to replace the handset batteries) or the base.

This could cause exposure to high voltages or other risks.

. Radio signal transmitted between the handset and base may cause interference

to hearing aids.

. The product may interfere with other electrical equipment, e.g. TV and radio sets,

clock/alarms and computers if placed them too close. It is recommended that the

product is placed at least one metre away from such appliances to minimize any

risk of interference.

. All batteries can cause property damage and/or bodily injury such as burns if a

conductive material such as jewellery, keys, or beaded chains touch the exposed

terminals. The conductive material may complete an electrical circuit (short

circuit) and become quite hot. Exercise care in handling any charged battery,

particularly when placing it inside a pocket, purse, or other container with metal

objects.

. Never dispose of batteries in a fire. There is a serious risk of explosion and/or

the release of highly toxic chemicals.

. It is recommended that advice from a qualified expert be sought before using this

product in the vicinity of emergency/intensive care medical equipment.

Environmental

. Do not expose to direct sunlight.

. The handset may become warm when the batteries are being charged or during

prolonged periods of use. This is normal. However, we recommend that to avoid

damage, do not place the product on antique/veneered wood.

. Do not place the product on carpets or other surfaces which generate fibres, or

place it in locations preventing the free flow of air over its surfaces.

. Do not submerge any part of the product in water and do not use it in damp or

humid conditions, such as bathrooms.

. Do not expose the product to fire, explosives or other hazardous conditions.