Operation Manual

34
icon is not scrolling during charge
. Adjust the handset slightly on the base.
. Clean the charging contacts with a cloth moistened with alcohol.
. Check that the mains power is connected properly and switched on.
. The battery is full. When the handset is fully charged,
icon will appear
steadily on the display.
No Caller Display
. Check the subscription with the network operator, see page 24.
. The caller may have withheld their number.
. The record cannot be found in the phonebook. Check that the correct name/
number is stored in the phonebook, with the full area code.
I have forgotten my PIN!
. Restore the phone to its default settings, see ‘6.7 Emergency default’, page 22.
Answering machine will not record new messages
. Is the recording memory full? Play and delete messages, see page 28.
. Is the OGM set to Answer Only? Change the OGM to Answer & Record, see
page 31.
Cannot register a handset to the base
. Up to a maximum of 5 handsets can be registered to a base. De-register a
handset in order to register a new one, see page 27.
. Check that correct PIN code (default = 0000) has been entered.
. Check that the handset and base are at least one metre away from other
electrical equipment to avoid interference when registering.
Handset does not ring
. The handset ringer volume may be set to Off, see page 19.
Base unit does not ring
. The base ringer volume may be set to Off, see page 21.
Noise interference on my phone or on other electrical equipment
nearby
. Place the phone at least one metre away from electrical appliances or any metal
obstructions to avoid any risk of interference.