Operation Manual

4
Instruction Manual
SPECIFICATIONS
Solar Panel (poly crystalline) : 5.5V 100mA
Rechargeable Lithium battery: 3.7V 2000mAh
USB charging cable: 5V 500mA
DC Output:
5.0V +/- 5% 500mA
5.5V +/- 5% 500mA
9.5V +/- 5% 500mA
Charging time for mobile phone: 1-2 hours
Charging time for internal Lithium battery using the solar panel: 12-14 hours
Charging time for internal Lithium battery using PC adaptor: 3-4 hours (advanced
charge management features internal circuitry for Li-ion battery constant voltage
safety)
FEATURES
You can charge from sunlight via the solar panel or use our supplied USB charging
cable to charge the internal Li-ion battery.
Adaptors for major brand phones are provided. If adaptors don’t match your
phone please purchase them from your local agent.
This appliance can also provide power to other digital devices such as Digital
Cameras, PDA and Portable DVD players.
Charge/Discharge indicator: The Charge/Discharge indicator will be on when
using the solar panel or via PC or when charging any digital device. The indicator
light will also come on when the internal battery power is very low.
OPERATING INSTRUCTIONS
1. Charging via Solar panel
Ensure the solar panel is facing the sun (LED will light Green which confirms the
internal battery is charging) When the light gets brighter the current is higher. If the
solar panel is not facing the sun the LED will be off or very dim signifying that the
solar panel is not charging. When the battery is fully charged LED will turn Green.
2. Charging by PC using the USB charging cable
Plug the charging cable into laptop or PC USB socket, connect the other end of cable
to the charger (LED will glow Green during charging) Approximately 3-4 hours later,
the internal Li-ion battery will be fully charged and indicator will glow Red. Unplug
unit when fully charged.
3. Charging portable digital devices
Select correct voltage for the device you are charging (cell phone usually 5V. Digital
cameras usually 5.5V and Portable DVD players 9.5V)Plug the switching cable to the
DC socket of the charger, then connect the other end to the digital device you are
charging via the adaptor, if you are charging a cell phone the power indicator on the
phone will show as charging. After approximately 1~2 hours the indicator in your
cell phone will show as being fully charged, Unplug switching cable from charger. If
the LED goes out during the charging process that signifies that the charger is out of
power and needs to be recharged either using the solar panel or a PC with the USB
connector. Unit can be connected to PC and be charged at the same time as the unit
is charging a cell phone.