Operation Manual

15. AF/MON, 7 Press and hold MON to change mono/stereo mode reception. In
radio mode, press AF shortly to switch RDS mode on or off.
16. EQ/TA, 8 Shortly press EQ to turn on equalization function and to select
desired audio mode.
Press and hold TA to switch TA mode on or off.
17. RPT, 3 Shortly press it to to continuously repeat the same track. When
playing MP3/WMA disc press and hold it to repeat all the tracks in
the current folder.
18. SHF, 4 Shortly press it to play all tracks on disc in random order. When
playing MP3/WMA disc, press and hold it to play all tracks (in the
current folder) in random order.
19. 0, 1 ~ 9 Numeric buttons.
20. SEL Press SEL to enter audio setting mode, the adjustment mode will
change in the following order, such as:
Bass > Treble > Balance > Fader
Press and hold it to enter SYSTEM SETTING mode. And you can
use
/
to adjust the to select the item, and use
VOL
/ to corresponding value.
21. VOL Use VOL
/ to increase the volume level.
SPECIFICATION
GENERAL
Power Supply Requirements : DC 12 Volts, Negative Ground
Chassis Dimensions : 178 (W) x 160 (D) x 50 (H)
Tone Controls
- Bass (at 100 Hz) : ±10 dB
- Treble (at 10 kHz) : ±10 dB
Maximum Output Power : 4x50 watts
Current Drain : 15 Ampere (max.)
CD PLAYER
Signal to Noise Ratio : More than 55 dB
Channel Separation : More than 50 dB
Frequency Response : 40Hz – 18 kHz
RADIO
FM
Frequency Coverage 87.5 to 108 MHz
IF 10.7 MHz
Sensitivity (S/N=30dB) 10dBu
Stereo Separation >25dB
MW
Frequency Coverage 522 to 1620 kHz
IF 450 kHz
Sensitivity (S/N=20dB) 36 dBu
Note:
Specifications and design are subject to modification, without notice, due to
improvements in technology.
Instruction Manual