User's Manual

40
The display image does not cover the entire screen.
• IfyouareinRGBmode(computer),ensurethatH-SizeandV-Positionintheon-screenmenuaresetcorrectly.
• IfyouareusingTV,AVorComponentwith480iinput,presstheWIDEbuttonontheremotetochangethescreenmode.
The TV has pixels (dots) that are always dark or always lit.
• YourHDTVisprecision-manufacturedusinganextremelyhighleveloftechnology.However,sometimespixelsmaynotdisplaycorrectly.These
typesofoccurrencesareinherenttothistypeofproductanddonotconstituteadefectiveproduct.
I see "noise" or static on the screen.
• WhenyourTV'sdigitalcapabilitiesexceedadigitalbroadcastsignal,thesignalisup-converted(improved)tomatchyourV'sdisplay
capabilities.Thisup-convertingcansometimescauseirregularitiesintheimage.
• Ifyouareusinganantenna,thesignalstrengthofthechannelmaybelow.EnsureyourantennaisconnectedsecurelytotheTVandmovethe
antennaaroundtheroomorclosetoawindowforthebestsignal.
When I change source, the volume changes.
• TheTVremembersthevolumeleveloneachinputsource.Ifthevolumelevelonthenewinputsourceishigherorlowerthanthelevelonthe
sourceyouswitchfrom,thedifferencemaybenoticeable.
• UsetheVolumeUp/Downbuttonsontheremotetoadjustthevolume.
When I change source, the display image changes size.
• TheTVrememberstheviewingmodeoneachinputsource.Iftheviewingmodeonthenewsourcediffersfromtheoneontheinputsource
youswitchfrom,thedifferencemaybenoticeable.

TECHNICAL SPECIFICATION
ScreenSize: 42"
Dimensionsw/Stand: 1014x624x50mm
Dimensionsw/oStand: 1014x677x256mm
Weightw/Stand: 16,7Kg
Weightw/oStand: 14,1Kg
TVType: LCDwithLEDBacklight
RefreshRate: 60Hz
MaximumResolution: 1920x1080
PixelPitch: 0.4845x0.4845mm
DynamicContrastRatio: 50,000:1
ResponseTime: 6ms
Brightness: 360cd/m2
2DViewingAngle: 178°(H)x178°(V)
HDMIInputs: 3
ComponentVideoInputs: 1
S-VideoInputs: 1
RF/CoaxialInput: 1
USBPorts:(SupportMPEG4) 3(1+2SMARTTV)
RGBInputs: 1
OSDLanguage: English,Dutch,German,French,Spanish,Portuguese
NumberofSpeakers 2
Watts/Channel 10W
DTV: DVB-T/DVB-C
VoltageRange: 100~240VAC@50/60Hz
PowerConsumption: 100W
StandbyPowerConsumption: <1W
EthernetPorts: 1
Wireless(WiFi): 802.11n
InstructionManual