Operation Manual

4 5
INSTALLING THE TV
After removing the TV from the box and inspecting the package contents you can begin installing the TV. Your TV can be installed in two ways:
• On a flat surface, using the included stand
• On a wall, using a VESA-standard wall mount (not included) to install the TV stand:
INSTALLING THE TV ON A WALL
To mount your TV on a wall, you will need a wall mount. Consult the information below to find the appropriate mount for your TV model:
Model LE-427118MT
Screw Size: M6
Screw Length: 14mm
Hole Pattern: 400mm (V) x 400mm (H)
Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. Be sure the mount you choose is capable
of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation.
To install your TV on a wall:
1. Place the TV screen-down on a clean, flat surface. To prevent
scratches or damage to the screen, place the TV on a soft surface,
such as carpet, rug, or blanket.
2. Using a Phillips-head screwdriver, attach the base to the TV by
inserting and tightening the included screws.
3. Move the TV with attached stand into an upright position and place
on a flat, level, and stable surface.
4. To ensure proper ventilation, leave at least 1" of space between the
back of the TV and any other objects (walls, etc).
1. Disconnect any cables connected to your TV.
2. Place the TV face-down on a clean, flat, stable surface. Be sure the
surface is clear of debris that can scratch or damage the TV.
3. Remove the base stander by loosening and removing the screws
4. Attach your TV and wall mount to the wall, carefully following the
instructions that came with your mount. Use all mount bracket
rated for the weight/load of this TV. See the product specifications
for the weight of this TV.
CONTROLS AND CONNECTIONS
Bottom and side terminals
VGA IN: Connect RGB cable from computer.
PC AUDIO In: Connect 3. 5mm connector from computer.
LAN: Connect Ethernet cable from home network.
AV IN: Connect S-video/audio in.
RF(DVB-T/C): Connect RF/Coaxial connector from cable or antenna.
Digital out: 2 channel digital audio.
YPBPR: Connect component (RGB) video.
HDMI (1,2,3): Connect HDMI devices.
USB: Connect a USB drive to play movies, music or photos.
APP USB(1,2): Connect a USB drive to play movies, music or photos or apps and for the wireless keyboard adapter.
BACK SIDE FUNCTION KEYS
Menu: Display on-screen menu.
Channel Up/Down: Change the channel.
Volume Left/Right: Increase or decrease the loudness of the TVs audio.
SOURCE: Change the input device. With each press of the button, the TV will display a different input source.
STANDBY: Turn the TV on or off.
Digital out USB HDMI3 SD Card
LAN
recovery key
USB2
USB1
CI Slot
AV / YPbPr
HDMI 1 HDMI 2 SCART PC Audio VGA RF
STANDBY
VOL +
VOL -
CH +
CH -
MENU
SOURCE
en
Instruction Manual Instruction Manual