User's Manual

8- Basic operating instructions
Turn on the LED-TV
When the STANDBY button is pressed and the LED-TV is turned on,
the indicator light on the front of the LED-TV changes from red to blue.
When the LED-TV is turned on, the input mode is displayed
on the screen.
When the LED-TV is turned off using the STANDBY button,
the LED-TV will go into standby mode and the indicator light turns red.
Switch Among Different Inputs :
TV/AV/SCART/YPBPR/VGA/HDMI/DVD
Press the Input button to display the inputs mode menu,
then press / key to select a input source and
press OK key to confirm.
Audio control
1. Press the VOL+ button to increase the volume.
A number will appear on screen indicating the volume level.
2. Press the VOL - button to decrease the volume.
A number will appear on screen indicating the volume level.
E) Connect with HDMI signal
1. HDMI input
2. DC 12V power input.
Connection steps:
* Read the user guide supplied with your AV devices and
ensure that it has a HDMI
connector;
* Make sure that the power of the LED-TV is off;
* Connect a HDMI cable to the corresponding interface
connector on the back of the
LED-TV
;
* Turn on the power of the LED-TV;
* Press the SOURCE button to set the video input mode of the LED-TV to “HDMI” mode;
Volume 50
E 9
TV
AV
SCART
SOURCE
HDMI
DVD
VGA
YPBPR
2 1