Operation Manual

3. AREA EUR/USA:
Use
/
(25) to set EUR or USA area frequency spacing.
4. HOUR 24H/12H:
To change the time display mode between 24 hour or 12 hour.
5. PCLK ON/OFF:
Use
/ (25) to set clock on or off when power off, when set PCLK ON, clock will
• AUXILIARY INPUT
The unit can be connected to a portable audio player through the AUX IN jack (31) on the
front panel. After finishing the connection, you can press
MOD button (5) on the front
panel to switch the mode to AUX IN mode.
37
OPERATION
UK
1. BEEP ON/OFF:
RADIO OPERATION
• SELECTING THE FREQUENCY BAND
At radio mode, press
BND
button (24) shortly to select the desired band. The reception
band will change in the following order:
• SELECTING STATION
Shortly press
/ buttons (1) to activate automatic seek function. Press for several seconds
until
“MANUAL”
appears on the display, the manual tuning mode is selected.
If both buttons have not been pressed for several seconds, they will return to seek tuning
mode and
“AUTO”
appears on the display.
FM1 FM2 FM3 AM (MW)
Use SEL button (26) or
/ (1) to select the item you want to change, and use / (25)
to change the corresponding setting.
To turn the beep sound on/off when pressing the volume up/down buttons.
Use (25) button to select
the volume level when the unit turning on.
/
2. P-VOL:
will appear with backlight on when power off.
• AUTOMATIC MEMORY STORING & PROGRAM SCANNING
- Automatic memory storing
Press AS/PS button (20) for several seconds “SEARCH” will appear on LCD.
The radio will search from the current frequency and checks the signal strength until one
cycle search is finished. And then 6 strongest stations are stored into the corresponding
preset number button.
- Program scanning Press AS/PS button (20) shortly to scan preset station. And the
corresponding station number P1~P6 will flash on LCD.
• MONO/STEREO
Press and hold MON
s
tations by selection mono operation.
of distant
(21) button to select mono or stereo mode. You can somtimes
improve reception
• SCAN
Press SCAN (18) button to enter scan mode, the unit will scan to higher frequency station
and keep on each station for several seconds (the corresponding frequency will flash 5
times on LCD).