User Manual For Model BTHF009DFP Bluetooth Portable Handsfree Car Kit With Caller ID Display & Phonebook V3.
Notice 1 You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Notice 2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Care and Maintenance Check the laws and regulations on the use of mobile phones and handsfree equipment in the area where you drive. Always give full attention to driving. In some areas, you are required to pull off the road and park before making or answering a call. Do not expose the handsfree to extreme temperature or direct sunlight. Do not expose it to moisture or humidity. Keep it away from any liquid or chemicals. Do not keep the device in dusty or dirty area. Only use a soft damp cloth to clean it.
Overview Dial from phonebook Model BTHF009DFP Bluetooth Portable Handsfree Car Kit with Caller ID Display & Phonebook Thank you for selecting BTHF009DFP Bluetooth portable handsfree car kit. It is a rechargeable speakerphone which is easy to operate in car and portable to use anywhere. It is specially designed for connecting Bluetooth compatible mobile phones without wires in car. No matter if the car is switched on or not, you can enjoy the freedom of wireless communication.
Phonebook Use in car You can wirelessly transfer your phonebook records from your phone to the memory of BTHF009DFP. In the phonebook menu, you can check the contact name and number and then dial out directly. When there is an incoming call and the number matches the phonebook record, BTHF009DFP will show the caller name on the LCD. Transfer phonebook records You can transfer a single record or all the records from the phone at one time. Some phone models support single record transfer only.
Quick User Guide Status Transfer to phone (call transfer) During a call, press & hold Multifunction Key for 3 seconds. LCD displays ‘BLUETOOTH’. To transfer back to handsfree, press once again. Redial the last number In standby mode, press Multifunction Key twice. The last number will be redialed. LCD displays ‘Dialing’. Voice dial In standby mode, press Multifunction Key once. LCD displays ‘Voice Call’. You will hear a tone from the handsfree.
Connect / Reconnect to phone After the handsfree is switched on, it is in idle mode. It is waiting to be paired or connnected by mobile phone. The LED indicator flashes blue every 5 seconds indicates this mode. When the handsfree and the device are disconnected, the handsfree will return back to idle mode. To connect with phone Status Redial last number In standby mode, press Multifunction Key twice. Voice dial In standby mode, press Multi- A tone from the handsfunction Key once.
Getting Started For the first time using the handsfree, please: Charge handsfree with the provided charger for 3 hours. Ensure a Bluetooth function supporting mobile phone is ready for pairing. Charging Charge with saver charger (cigarette light Charge with travel charger adaptor) Switch on the handsfree. Switch on the handsfree. Connect the saver charger to the in car cigarette socket, and then to the charging port of the handsfree.
