User guide

User Guide
27
NO TG
No talk groups have been
downloaded to the radio.
If this condition persists,
contact MSV Customer
Support.
BLOCKED
Signifies that the radio's
antenna signal to the
satellite is blocked.
Ensure that the antenna has
a clear line-of-sight to the
satellite.
X-OVER
FAILURE
Signifies that the user has
initiated a manual beam
cross-over to a beam that
is not accessible.
Following the appearance
of the failure message the
user will be returned to
the beam options list.
Ensure that the appropriate
adjacent satellite beam is
chosen when initiating a
manual beam cross-over.
RF POWER
FAILURE
The radio detected a
problem with its RF
transmissions and
disabled the transmitter.
Power cycle the radio. If
this condition persists,
contact MSV Customer
Support.
WARNING!
OVERHEAT
Signifies that the radio is
overheating. This
message will appear at 10
second intervals until the
t
emperature is reduced. If
the temperature
continues to increase
then the radio will
shutdown.
Move the radio to a cooler
place. If the radio powers
off, allow it to cool down
before re-initiating the
power-up sequence.
INVALID
PASSWORD
Signifies the user has
entered the wrong
Dealer or SYSTEM Menu
password.
Enter the correct
password. If the password
is unknown, contact MSV
Customer Support with the
radio's ESN. Customer
Support can provide a new
SYSTEM password.
WRONG LOCK
CODE
Signifies the user has
entered the wrong
Handset Lock code.
If you cannot remember
the lock code (default is
0000), enter the SYSTEM
password (default 1234)
when prompted to enter
the code.