User guide

26 User Guide
ERROR MESSAGES
Error Condition Definition Action
SEARCHING…
If signal strength bars are
seen, the radio is in the
process of connecting to
the MSAT network. If
signal strength bars are
not seen, the radio
cannot receive a satellite
signal.
If the condition persists,
check the radio has a clear
view of the southern sky
and that the antenna is
connected and is
functioning (e.g. can hear
the servo motor in the
antenna).
WAIT…
Signifies that the radio
has not received a
response to the PTT
request from the MSAT
network and is
attempting several
retries.
Continue to press the PTT
key. If the call is successful,
USER ON will be displayed.
In the event a call fails, a
PTT FAIL message will
appear requiring the user
to release the PTT key and
try again.
PTT FAIL
Signifies the radio failed
to receive a response to
the PTT request from the
MSAT network.
Release the PTT key and
try again. If this message
continues, contact MSV
Customer Support.
PRESSPT
Signifies the PTT key was
been pressed then
released just before the
radio received the
confirmation from the
network.
Press and hold the PTT key
in order to talk.
INVALID DN
Signifies the user has
entered a Directory
Number (DN) that is not
a member of the private
mode talk group
currently active on the
radio.
Ensure a valid DN is
entered in tag position 00.