User guide

User Guide

SOFTWARE VERSION

Here you can view the software version for the transceiver unit, handset and

antenna unit.

SERIAL PORT

This option allows you to set up three different serial port configurations.

1. SELECT the SERIAL PORT option from the ADMIN Menu.

2. SELECT one of the three options to turn it on. Only one option can be

active at a time:

a. DATA IO: This is the default. When this option is ON, the serial

port is disabled.

b. CROSSBAND: When this option is ON, Third Party cross-band

interfaces can access Dispatch Radio activity enabling MSAT

interconnectivity to standard Land Mobile Radio equipment.

c. GPS OUTPUT: When this option is ON, GPS data received from

the Antenna Unit (AU) can be sent to an external device in NMEA

format. The GPS port speed is 4.8 kbps.

3. For each configuration, once you SELECT it, you are asked to confirm the

configuration. Press YES to confirm or NO to cancel.

4. With confirmation or cancellation, you are returned to the Serial Port

option Menu. Press BACK to go back to the ADMIN Menu.

SYSTEM MENU

When you SELECT the SYSTEM option on the Main Menu, you are

prompted for the System Password. Type in the Password (the factory

default is 1234) and press OK.

The options on the System Menu allow you to change certain system settings:

• Password

• Lock Code

• Beam/Signal: Off/On