User guide

User Guide
21
LABEL TG
Use this option to assign a name to any or all downloaded talk group tag
position(s). Navigate the DR ADMIN Menu and SELECT the LABEL TG
option.
1. The list of current groups is displayed.
2. Navigate the list with the Up and Down arrows, and then SELECT
the Group you want to edit.
3. You are then prompted to ENTER LABEL for the group tag. Use
CLEAR to backspace over the existing tag. Use the alphanumeric keys to
type in the new name.
4. Press STORE to save the updated tag and go back to the list of talk
groups, and then press BACK to go back to the DR ADMIN menu.
5. If you CLEAR all the text and then press CLEAR, you exit editing
without changing anything. If you press STORE without changing anything,
you are returned to the DR ADMIN menu.
P1
(PRIORITY 1) SETUP
Navigate the DR Admin Menu and SELECT this option to define the Priority
1 Emergency Talk Group.
You have a choice of setting up P1 in one of two ways:
NORMAL:
SELECT this option (Default) to choose any active talk group
or currently selected talk group to be the Priority-1 Emergency talk group
when the P1 key is pressed.
DEFINE:
SELECT this option to navigate the list of talk groups. SELECT
one of the downloaded talk groups to be the Priority-1 talk group. Each time
the P1 key is pressed, your defined talk group is initiated. Once you have
selected the group, press OK to select the group and return to Idle mode.
X-OVER
In the event that a manual beam cross-over is necessary, you can initiate it
through this ADMIN Menu option.
Note that the list of beam options may be shorter, depending on those
available from the satellite.