AXON AIR BLE Module User Manual
Features: Bluetooth® 5, IEEE 802.15.4-2006, 2.4 GHz transceiver. Buttons and LEDs for user interaction. I/O interface and NFC interface for user to expand. Support backup battery power supply. Support SEGGER J-Link debug interface. CE/FCC/IC compliant.
Hardware Specifications: Bluetooth 5.0 Low Energy Standard: IEEE 802.15.4 Frequency Band: Receiver Sensitivity: 2.402GHz to 2.480GHz -95 dBm sensitivity in 1 Mbps CH: 0~39 Bluetooth® low energy mode Frequency Spacing: 2MHz Supported data rates: Antenna: 1 Mbps MMCX connector *2 Power: CPU: DC 3.
RF Work Mode: Beacon Transmit Configuration: TX: Bypass Mode/Low Power Configure iBeacon/Eddy stone / Mode/High Power Mode customized Beacon. RX: Bypass Mode/LNA Mode Beacon Scan Antenna Select: Can select ANT1/ANT2/Sleep Mode Scan and receive BLE beacons.
Specification Table Item Description Type BLE Module Size（mm） 30 mm * 51mm Weight（g） 9.7 g Control Port Mini PCIe Power Supply DC 3.3V Antenna 2 external antennas Bluetooth Port Bluetooth 5.
BLE Module Outward Number Description 1 Antenna Connecters 2 J-Link Interface 3 Button 4 Battery 5 Mini PCIe Interface 6 IO Expansion Interface 7 NFC Interface 8 LED
Final Product Sample Example
Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Industry Canada (IC) CAN ICES-3 (B)/NMB-3(B) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la norme RSS d'Industrie Canada.
Federal Communications Commission (FCC) Interference Statement THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE.
If the final host / module combination is intended for use as a portable device (see classifications below) the host manufacturer is responsible for separate approvals for the SAR requirements from FCC Part 2.1093 and RSS-102.
Simultaneous Transmission Evaluation This module has not been evaluated or approved for simultaneous transmission as it is impossible to determine the exact multi-transmission scenario that a host manufacturer may choose. Any simultaneous transmission condition established through module integration into a host product must be evaluated per the requirements in KDB447498D01(8) and KDB616217D01, D03 (for laptop, notebook, netbook, and tablet applications).
