Specifications

5
MSSC, LLC Collinsville, IL USA Tel: [phone] Fax: [phone] Rev 22211
www.msscllc.com
5. Controller and Print Head Grounding Cable.
To help prevent the buildup of static electricity on the controller and/or remote print head, the included grounding
wire(s) should be attached to a proper earth ground, bare metal. This wire gives the static charge a direct path to
ground preventing discharge through the controller’s or printhead’s sensitive electrical components.
For the QM2-111, perform steps 1 and 2. For the QM2-101, perform step 2 only.
5a
. Place large ring terminal of
supplied ground wire under print
head mounting screw as shown
below and terminate the other end to
earth ground.
5
b.
Place large ring terminal of
supplied ground wire under
controller mounting screw as
shown below and terminate the
other end to earth ground.