User`s manual

5-6
SUPERSERVER 6026TT-HT(R)F/HIBX(R)F/HIBQ(R)F USER'S MANUAL
4. After removing the plastic cap, use
your thumb and the index fi nger to
hold the CPU at the north and south
center edges.
5. Align the CPU key (the semi-circle
cutout) with the socket key (the
notch below the gold color dot on
the side of the socket).
6. Once the CPU and the socket are
aligned, carefully lower the CPU
straight down into the socket. Do
not rub the CPU against the surface
of the socket or its pins to avoid
damaging the CPU or the socket.
7. With the CPU in the socket, inspect
the four corners of the CPU to
make sure that it sits level and is
properly installed.
8. Once the CPU is securely seated
in the socket, lower the CPU load
plate to the socket.
9. Use your thumb to gently push the
socket clip down to the clip lock.
10. Repeat for the CPU2 socket for a
dual-processor confi guration.
Important! Please save the plastic cap.
The motherboard must be shipped with
the plastic cap properly installed to
protect the CPU socket pins. Shipment
without the plastic cap properly installed
may cause damage to the socket pins.
CPU
CPU Socket
Load Plate
CPU
Align CPU keys with
socket keys.