User`s guide

2-1
Safety Information and Technical Specifi cations
Chapter 2
SATA-M35 and SCA-M942 Backplane Specifi cations
To avoid personal injury and property damage, carefully follow all the safety steps
listed below when accessing your system or handling the components.
2-1 ESD Safety Guidelines
Electrostatic Discharge (ESD) can damage electronic com ponents. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally suffi cient to protect your equipment from ESD.
Use a grounded wrist strap designed to prevent static discharge.
•
Touch a grounded metal object before removing a component from the antistatic •
bag.
Handle the backplane by its edges only; do not touch its components, peripheral
•
chips, memory modules or gold contacts.
When handling chips or modules, avoid touching their pins.
•
Put the backplane and peripherals back into their antistatic bags when not in •
use.
2-2 General Safety Guidelines
Always disconnect power cables before installing or removing any components •
from the computer, including the mobile rack.
Disconnect the power cable before installing or removing any cables from the
•
mobile rack.
Make sure that the mobile rack is securely and properly installed on the moth-
•
erboard to prevent damage to the system due to power shortage.