User guide

ManageEngine Firewall Analyzer :: User Guide
97
Zoho Corp.
Current Startup-Running Conflict Report
The report will show the current conflicts between the startup and running
configurations.
• The three configuration reports, Running Configuration Changes Report,
Startup Configuration Changes Report, and Current Startup-Running
Conflict Report are applicable only for Cisco devices. Only Running
Configuration Changes Report is applicable for Netscreen and Fortigate
devices.
• The calendar date setting will not be applicable for this report. As name
suggests, this report will show only conflicts/differences between the current
startup and current running configurations.
How to configure the Firewall device to get change management reports
• All the details/credentials required to connect to Firewall using Telnet/SSH
should be given by the user in the Device Rule Info page. (Settings > Device
Rule >Add Device Info link).
• Fill all the details/credentials required to connect to the firewall using
Telnet/SSH
• Enable 'Generate Change Management Report' option to get Firewall
Change Management Report. If any Notifications or scheduled reports are
needed fill the details accordingly in the provided fields.
The Firewall Analyzer fetches the Firewall device configuration on the following
occasions:
• Device logout - When ever Firewall Analyzer receives the device logout
syslog
• Periodical - The periodic schedule configured for fetching the device rules is
applicable for fetching the configuration data also
• On Demand - To fetch the configuration data when ever required, click
Settings > Device Rule icon. It will open Device Rule page, in that page
click the icon besides the 'View Config Changes' link