User guide

ManageEngine Firewall Analyzer :: User Guide
243
Zoho Corp.
Juniper Networks IDP Device (version IDP 50)
Configuring to send Syslog Messages directly from Sensor
1. Log in to the Juniper Networks IDP device.
2. Click Device > Report Settings > Enable Syslog in the Juniper Networks IDP
device.
3. Select the Enable Syslog Messages check box.
4. Click Apply to save the changes.
This configuration will generate syslogs for:
• All attacks
• Policy load
• Restart
This configuration will not provide:
• Profiler logs
• Device connect/disconnect logs
• Interface UP/DOWN logs
• Logs for Bypass State Changes
Configuring to send Syslog Messages from NSM
1. Log in to NSM.
2. Click Action Manager > Action Parameters > Define a Syslog Server in the
NSM.
3. Click Action Manager > Device Log Action Criteria > Category in the NSM.
4. Select Category = all and Actions = syslog enable
5. Click Apply to save the changes.