User guide

ManageEngine Firewall Analyzer :: User Guide
22
Zoho Corp.
• Right-click ManageEngine Firewall Analyzer 7, and select Stop in the menu.
• Alternatively, select Properties. The <Service> Properties screen opens up.
• In the General tab of the screen, check the Service status is "Started" and
Stop button is in enabled state and other buttons besides are grayed.
• Click Stop button to stop the windows service.
Linux:
1. Navigate to the <Firewall Analyzer Home>/bin directory.
2. Execute the shutdown.sh file.
3. You will be asked to confirm your choice, after which the Firewall Analyzer server
is shut down.
Stopping Firewall Analyzer service in Linux
/etc/init.d/firewallanalyzer stop
Stopping ManageEngine Firewall Analyzer 7.0...
Stopped ManageEngine Firewall Analyzer 7.0.
Check the status of the service again
/etc/init.d/firewallanalyzer status
ManageEngine Firewall Analyzer 7.0 is not running.
To configure Firewall Analyzer as service in Linux, after installation
Normally, the Firewall Analyzer is installed as a service. If you have installed as an
application and not as a service, you can configure it as a service any time later. The
procedure to configure as service, start and stop the service is given below.
To configure Firewall Analyzer as a service after installation, execute the following
command.
sh configureAsService.sh -i
Usage of Firewall Analyzer service command
<Firewall Analyzer Home>/bin # /etc/init.d/firewallanalyzer
Usage: /etc/init.d/firewallanalyzer { console | start | stop | restart | status | dump }