User guide

ManageEngine Firewall Analyzer :: User Guide
224
Zoho Corp.
Use the following command:
configure terminal
3. Enable logging by using the following commands:
logging on
logging trap informational
logging <IP Address>
4. If there is a Firewall module in the IOS device, use the following command to
enable audit trail. This will generate traffic information.
ip inspect audit-trail
For more information, refer the Cisco IOS Switch documentation.
Configure/Enable SNMP Protocol for Cisco Firewall devices using Cisco ASDM
tool
Using Web UI:
Configure SNMP parameters for SNMP Versions 1 and 2c
Carry out the following steps:
• In the ASDM main window, select Configuration > Device Management >
Management Access > SNMP
• In the Community String (default) field, enter default community string.
This applies to SNMP Versions 1 and 2c only
• Fill appropriate values in Contact and Location fields
• In the Listening Port field, enter the port number of the security appliance
that listens for SNMP requests from management stations; or retain the
default port number 161
• Click Apply
With this, SNMP parameters for Versions 1 and 2c are configured and the changes are
saved to the running configuration.
To enable the SNMP Manager running in Firewall Analyzer to make queries to SNMP
Agent running in the firewall:
• In the ASDM main window, choose Configuration > Device Management
> Management Access > SNMP
• In the SNMP Management Stations pane, click Add. The Add SNMP Host
Access Entry dialog box appears
• In the Interface Name drop-down list, choose the interface on which the
Firewall Analyzer resides
• In the IP Address field, enter the Firewall Analyzer IP address
• In the UDP Port field, enter the Firewall Analyzer UDP port, or retain the
default port 162
• In the Community String field, enter the Firewall Analyzer community
string. If no community string is specified for a management station, the