User guide

ManageEngine Firewall Analyzer :: User Guide
223
Zoho Corp.
If you want to create a new SNMP community use the below command:
configure terminal
snmp-server community <community-string>
Example:
configure terminal
snmp-server community public
Configuring Cisco VPN 3000 Concentrator
Currently we support Cisco IOS Compatible Log Format and Original Log Format for
Cisco VPN Concentrator.
Importing of already saved Cisco VPN Concentrator logs is not supported because those
logs are saved in either of the following formats which is not supported in Firewall
Analyzer:
• Multi line
• Tab Delimited
• Comma Delimited
Follow the below steps to configure the VPN Concentrator:
1. Configuring Syslog Server
a. Login to the Cisco VPN 3000 Concentrator Management console.
b. Go to Configuration > System> Events >Syslog Servers
c. Click the Add button
d. In the Syslog Server text box enter the IP Address of the machine where
Firewall Analyzer is running.
e. Enter the Port value. The default syslog server port for Firewall Analyzer
is 514.
f. Facility is Local 7
2. Configuring Syslog Events
a. Go to Configuration > System> Events >General
b. For Syslog Format you can either select Original or Cisco IOS
Compatible format.
c. For Events to Syslog select Severities 1-5
d. All other configurations are default for this page.
e. Click Apply button
For more information, refer the Cisco VPN Concentrator documentation.
Configuring Cisco IOS Switch
Follow the below steps to configure the Cisco IOS Switch:
1. Login to the Cisco IOS console or Telnet to the device.
2. Change the configuration mode of the device.