User guide

ManageEngine Firewall Analyzer :: User Guide
165
Zoho Corp.
Fetch Rules/Config > From Device
You can configure the individual device credentials to fetch the rules and configuration
from the device or you can create a common profile of device credential which can be
used for a group of devices to fetch rules.
7. In the From Device tab, select the protocol (Telnet or SSH) in the Protocol drop
down list.
8. In the Use Profile tab, select the profile in the Use Profile drop down list. If
there is no profile available or you want to create and use a new profile, click
New Profile link besides the combo box.
9. Enter the Device Info. The Device Info has been split into two sections:
• Primary Info - deal with parameters that are necessary to establish
communication with the device. Details such as Login Name, Password,
Prompt, Enable UserName, Enable Password and Enable Prompt are classified
as basic details.
• Secondary Info - certain parameters usually take standard values. All such
parameters have been classified under 'Secondary Info'. Port, login prompt,
enable user prompt, password prompt, enable password prompt values are
usually assigned with certain Standard Values by default. Such standard
values have been filled for these parameters. Most of the devices would work
well with these values and you need not edit these details unless you want to
provide different set of details.
Primary Info
Device Info
Description
Login Name
While establishing connection with a device, if the device asks for a Login
Name, set a value for this parameter. This parameter is Optional.
Password
To set the Password for accessing the device.
Prompt The prompt that appears after successful login.
Enable
UserName
When entering into privileged mode, some devices require UserName to be
entered. Provide the username if prompted; otherwise leave this field empty.
Enable
Password
This is for entering into privileged mode to perform configuration operations
like backup/upload. This parameter is mandatory.
Enable
Prompt
This is the prompt that will appear after going into enable mode.
Both Primary and Secondary credentials (Login Name and Password) of the Firewalls
are encrypted and stored in the Firewall Analyzer.
Secondary Info
Click the link Secondary Info to view/enter values for these parameters. All the
parameters are usually assigned with certain Standard Values by default. Such standard
values have been filled for these parameters. Most of the devices would work well with
these values and you need not edit these details unless you want to provide different set
of details.