User guide

ManageEngine Firewall Analyzer :: User Guide
134
Zoho Corp.
VPN Report:
• In a period of 1 Hour, 2 Hours, 6 Hours, 12 Hours, 1 Day, 7 Days, 14 Days,
30 Days, This Week, This Month If Total Traffic, Sent Traffic, Received Traffic,
Number of Hits, Duration of All, Any Source, Any Destination, Any Protocol
exceeds <amount>_ MB, GB, KB or Times or secs, minutes, hours, days.
• create an Alert with Priority as - Priority of the alert can be High, Medium, or
Low based on your requirement for notification. Select the appropriate
Priority.
• Assign owner
• Check for every
URL Report:
• In a period of 1 Hour, 2 Hours, 6 Hours, 12 Hours, 1 Day, 7 Days, 14 Days,
30 Days, This Week, This Month If Total Traffic, Sent Traffic, Received Traffic,
Number of Hits, Duration of All, Any Source, Any Destination, Any Protocol
exceeds <amount>_ MB, GB, KB or Times or secs, minutes, hours, days.
• create an Alert with Priority as - Priority of the alert can be High, Medium, or
Low based on your requirement for notification. Select the appropriate
Priority.
• Assign owner
• Check for every
Rule Report:
• In a period of 1 Hour, 2 Hours, 6 Hours, 12 Hours, 1 Day, 7 Days, 14 Days,
30 Days, This Week, This Month If Number of Hits, Denied Requests of All,
Any Source, Any Destination, Any Protocol exceeds <number>_ times.
• create an Alert with Priority as - Priority of the alert can be High, Medium, or
Low based on your requirement for notification. Select the appropriate
Priority.
• Assign owner
• Check for every
Alert Profile Examples
With the combinational usage of Alert Profile Type, Filters, and Threshold parameters,
you will be able to create Alert Profiles addressing your precise and selective needs.
Some of the example profile are discussed below:
• Say, you want to get notification of all Critical Events, enter the criteria as
Severity is '2". For the severity and severity number mapping refer the table
given below.
• Same way, if you want to get notification of all attack logs, enter the criteria
as RecordType is 'attack'.
• If you want to get notification for all virus logs, enter the criteria as
RecordType is 'virus'.