Specifications

34
Using BIOS
PnP/PCI Configuration
These options configure how PnP (Plug and Ply) and PCI expansion cards operate in your
system.
YES: Assign IRQ to PCI
VGA card if card requests
IRQ.
NO: Does not assign IRQ
to PCI VGA card even if card
requests an IRQ.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
PnP/PCI Configuration
Allocate IRQ to PCI VGA [Enabled]
PCI IDE BusMaster [Enabled]
PCI/VGA Palette Snoop [Disabled]
Press <Esc> to return to the Main BIOS Setting page.
: Move
F10: Save
F1: General help

+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F8: Fail-Safe DefaultsF7:Previous Values
Allocate IRQ to PCI VGA (Enabled)
This item allows users to enable or disable the function of allocating IRQ to PCI VGA.
PCI IDE BusMaster (Enabled)
This item allows users to enable or disable the PCI IDE BusMaster function. Users are
recommended to keep this item at its default value.
PCI/VGA Palette Snoop (Disabled)
This option is only very rarely needed. It should be left at “Disabled” unless a video
device specifically requires the setting enabled upon installation.