Specifications

Using BIOS

Hard Disk Write Protect (Disabled)

Use this item to enable or disable hard disk write protection.

ATA(PI) 80Pin Cable Detection (Host)

Select the mechanism for detecting 80Pin ATA(PI) Cable.

Press <Esc> to return to the Advanced BIOS Features page.

IDE Ultra DMA Mode (Enabled)

Select this item to enable or disable the IDE Ultra DMA Mode.

IDE Detect Time Out (35)

This item allows you to set time out for IDE detection.

Floppy Confuguration

Help Item

: Move

F10: Save

F1: General help



+/-/: Value

Enter : Select

ESC: Exit

F9: Optimized Defaults

F8: Fail-Safe DefaultsF7:Previous Values

Floppy Configuration (Press Enter)

Scroll to this item and press <Enter> to view the following screen:



Floppy Configuration

Floppy A [1.44 MB 31/2’’]

Floppy Configuration (1.44 MB 31/2’’)

This item shows the information of the flpooy drive installed.

Press <Esc> to return to the Advanced BIOS Features page.

Select the type of floppy

drive connected to the

system.