User Manual
Table Of Contents
- Sicherheitshinweis
- Spezifikationen
- Rückseite E/A
- Übersicht der Komponenten
- CPU Sockel
- DIMM Steckplätze
- DIMM Steckplätze
- PCI_E1~4: PCIe Erweiterungssteckplätze
- JFP1, JFP2: Frontpanel-Anschlüsse
- SATA1~6: SATA 6Gb/s Anschlüsse
- JAUD1: Audioanschluss des Frontpanels
- M2_1~4: M.2 Steckplatz (Key M)
- ATX_PWR1, CPU_PWR1~2: Stromanschlüsse
- JUSB1~2: USB 2.0 Anschlüsse
- JUSB3~4: USB 3.2 Gen 1 5Gbit/s Anschluss
- JUSB5: USB 3.2 Gen 2 Typ-C Anschluss
- JTBT1: Anschluss für Thunderbolt-Erweiterungskarte
- CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Stromanschlüsse für Lüfter
- JTPM1: TPM Anschluss
- JCI1: Gehäusekontaktanschluss
- JDASH1: Tuning Controller-Anschluss
- JBAT1: Clear CMOS Steckbrücke (Reset BIOS)
- JRAINBOW1~2: Adressierbarer RGB-LED-Streifen Anschlüsse
- JRGB1: RGB LED Anschluss
- EZ DEBUG LED
- Installation von OS, Treibern & MSI Center
- UEFI BIOS
- Безопасное использование продукции
- Технические характеристики
- Задняя панель портов ввода/ вывода
- Компоненты материнской платы
- Процессорный сокет
- Слоты DIMM
- Слоты DIMM
- PCI_E1~4: Слоты расширения PCIe
- JFP1, JFP2: Разъемы передней панели
- SATA1~6: Разъемы SATA 6Гб/с
- JAUD1: Разъем аудио передней панели
- M2_1~4: Разъемы M.2 (Ключ M)
- ATX_PWR1, CPU_PWR1~2: Разъемы питания
- JUSB1~2: Разъемы USB 2.0
- JUSB3~4: Разъем USB 3.2 Gen 1 5Гб/с
- JUSB5: Разъем USB 3.2 Gen 2 Type-C
- JTBT1: Разъем для установки карты расширения Thunderbolt
- CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: Разъемы вентиляторов
- JTPM1: Разъем модуля ТРМ
- JCI1: Разъем датчика открытия корпуса
- JDASH1: Разъем контроллера настройки
- JBAT1: Джампер очистки данных CMOS (Сброс BIOS)
- JRAINBOW1~2: Разъемы адресных RGB LED
- JRGB1: Разъем RGB LED
- Индикаторы отладки EZ
- Установка ОС, драйверов и MSI Center
- UEFI BIOS
- 安全信息
- 规格
- 后置 I/O 面板
- 组件概述
- CPU 底座
- DIMM 插槽
- DIMM 插槽
- PCI_E1~4: PCIe 扩展插槽
- JFP1, JFP2: 前置面板接口
- SATA1~6: SATA 6Gb/s 接口
- JAUD1: 前置音频接口
- M2_1~4: M.2 接口 (M 键)
- ATX_PWR1, CPU_PWR1~2: 电源接口
- JUSB1~2: USB 2.0 接口
- JUSB3~4: USB 3.2 Gen 1 5Gbps 接口
- JUSB5: USB 3.2 Gen 2 Type-C 接口
- JTBT1: Thunderbolt 附加卡接口
- CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: 风扇接口
- JTPM1: TPM 模组接口
- JCI1: 机箱入侵检测接口
- JDASH1: 调试控制器接口
- JBAT1: 清除 CMOS (重启 BIOS) 跳线
- JRAINBOW1~2: 寻址 RGB LED 接口
- JRGB1: RGB LED 接口
- 简易侦错 LED 灯
- 安装操作系统，驱动程序和 MSI Center
- UEFI BIOS
- 安全說明
- 規格
- 背板 I/O
- 元件總覽
- CPU 腳座
- 記憶體插槽
- 記憶體插槽
- PCI_E1~4: PCIe 擴充插槽
- JFP1, JFP2: 系統面板接頭
- SATA1~6: SATA 6Gb/s 插孔
- JAUD1: 前置音效插孔
- M2_1~4: M.2 插槽 (M 鍵)
- ATX_PWR1，CPU_PWR1~2: 電源接頭
- JUSB1~2: USB 2.0 接頭
- JUSB3~4: USB 3.2 Gen 1 5Gbps 接頭
- JUSB5: USB 3.2 Gen 2 Type-C 接頭
- JTBT1: Thunderbolt 擴充卡接頭
- CPU_FAN1, PUMP_FAN1, SYS_FAN1~6: 風扇電源接頭
- JTPM1: TPM 模組接頭
- JCI1: 機殼開啟接頭
- JDASH1: 調試控制器接頭
- JBAT1: 清除 CMOS (重置 BIOS) 功能跳線
- JRAINBOW1~2: 可定址 RGB LED 接頭
- JRGB1: RGB LED 接頭
- 除錯 LED 指示燈
- 安裝操作系統、驅動程式和 MSI Center
- UEFI BIOS
- 安全に関する注意事項
- 仕様
- リアI/Oパネル
- コンポーネントの概要
- CPUソケット
- DIMMスロット
- DIMMスロット
- PCI_E1~4: PCIe拡張スロット
- JFP1、JFP2: フロントパネルコネクター
- SATA1~6: SATA 6Gb/sコネクター
- JAUD1: フロントオーディオコネクター
- M2_1~4: M.2スロット (Key M)
- ATX_PWR1、CPU_PWR1~2: 電源コネクター
- JUSB1~2: USB 2.0コネクター
- JUSB3~4: USB 3.2 Gen 1 5Gbps コネクター
- JUSB5: USB 3.2 Gen 2 Type-Cコネクター
- JTBT1: Thunderbolt追加カードコネクター
- CPU_FAN1、PUMP_FAN1、SYS_FAN1~6: ファンコネクター
- JTPM1: TPMモジュールコネクター
- JCI1: ケース開放スイッチコネクター
- JDASH1: チューニングコントローラーコネクター
- JBAT1: クリアCMOS (BIOSリセット) ジャンパ
- JRAINBOW1~2: 追加のRGB LEDコネクター
- JRGB1: RGB LEDコネクター
- EZ Debug LED
- OS、ドライバーおよびMSI Centerのインストール
- UEFI BIOS
3
The components included in this package are prone to damage from electrostatic
discharge (ESD). Please adhere to the following instructions to ensure successful
computer assembly.
Ensure that all components are securely connected. Loose connections may cause
the computer to not recognize a component or fail to start.
Hold the motherboard by the edges to avoid touching sensitive components.
It is recommended to wear an electrostatic discharge (ESD) wrist strap when
handling the motherboard to prevent electrostatic damage. If an ESD wrist strap is
not available, discharge yourself of static electricity by touching another metal object
before handling the motherboard.
Store the motherboard in an electrostatic shielding container or on an anti-static
pad whenever the motherboard is not installed.
Before turning on the computer, ensure that there are no loose screws or metal
components on the motherboard or anywhere within the computer case.
Do not boot the computer before installation is completed. This could cause
permanent damage to the components as well as injury to the user.
If you need help during any installation step, please consult a certified computer
technician.
Always turn off the power supply and unplug the power cord from the power outlet
before installing or removing any computer component.
Keep this user guide for future reference.
Keep this motherboard away from humidity.
Make sure that your electrical outlet provides the same voltage as is indicated on
the PSU, before connecting the PSU to the electrical outlet.
Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
All cautions and warnings on the motherboard should be noted.
If any of the following situations arises, get the motherboard checked by service
personnel:
Liquid has penetrated into the computer.
The motherboard has been exposed to moisture.
The motherboard does not work well or you can not get it work according to
user guide.
The motherboard has been dropped and damaged.
The motherboard has obvious sign of breakage.
Do not leave this motherboard in an environment above 60°C (140°F), it may
damage the motherboard.