User Manual

15
 


 Always insert memory modules in the 
 To ensure system stability for Dual channel mode, memory modules must be of the
same type, number and density.
 Some memory modules may operate at a lower frequency than the marked value
when overclocking due to the memory frequency operates dependent on its Serial
 to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
 󽙎
installation or overclocking.
 The stability and compatibility of installed memory module depend on installed
CPU and devices when overclocking.
 Please refer msi.com for more information on compatible memory.



 󽙋
unplug the power supply power cable from the power outlet. Read the expansion
card’s documentation to check for any necessary additional hardware or software
changes.
 If you install a large and heavy graphics card, you need to use a tool such as 
 to support its weight to prevent deformation
of the slot.
 For a single PCIe x16 expansion card installation with optimum performance, using
the  slot is recommended.
: PCIe 5.0 x16 (From CPU)
: PCIe 3.0 x4 (From Z690 chipset)
: PCIe 3.0 x1 (From Z690 chipset)
: PCIe 3.0 x1 (From Z690 chipset)