PRO Series Personal Computer PRO DP B0A6 User Guide
Contents Getting Started.............................................................................................................. 3 Package Contents ................................................................................................... 3 Safety & Comfort Tips ............................................................................................ 3 System Overview..................................................................................................... 4 Hardware Setup .....
Getting Started This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity.
System Overview 1 2 6 7 8 3 3 10 9 4 5 10 3 11 4 Getting Started 12 13
1 Power Button 2 Hard Disk Drive LED 3 USB 3.2 Gen 1x1 Port 4 USB 3.2 Gen 2x1 Port (Type-C) 5 Combo Audio Jack 6 Power Button Switch Cable Connector 7 HDMI™ Connector Press the power button to turn the system on and off. This indicator shows the activity status of the HDD. It flashes when the system is accessing data on the HDD and remains off when no disk activity is detected. This connector is provided for USB peripheral devices.
9 Thunderbolt™ 4 Port (USB Type-C) ∙ Support up to 40Gbps transfer rate with Thunderbolt devices. ∙ Support up to 20Gbps transfer rate with USB 4 devices. ∙ Support up to 10Gbps transfer rate with USB 3.2 devices. ∙ Support up to 5V/3A,15W power charging. ∙ Each port can daisy-chain up to three Thunderbolt 4 devices or five Thunderbolt 3 devices. ∙ Graphics cards are the only source from which Thunderbolt™ 4 port receives video signals.
Hardware Setup ⚠ Important Connect your peripheral devices to suitable ports. ∙ For detailed instructions on how to connect, please refer to the manuals of your peripheral devices. ∙ Reference image only. Appearance will vary. Connect the power cord to the system and electrical outlet. ∙ External Power Supply: 120W, 19.5V ∙ Input: 100~240Vac, 50/60Hz ∙ Output: 19.5V 6.15A ⚠ Important When unplugging the AC power cord, always hold the connector part of the cord. Never pull the cord directly.
Connect the power button switch cable.
Placing the Device 10 Users can place the device horizontally, vertically, or wall mount it.
Windows 11 System Operations ⚠ Important All information and Windows screenshots are subject to change without prior notice. Power Management Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver environmental benefits. To be energy efficient, turn off your display or set your PC to sleep mode after a period of user inactivity. 1. Right-click [Start] and select [Power Options] from the list. 2.
∙ Tune the settings in Power Options under Windows OS to optimize your PC’s power management. ∙ Install power saving software to manage your PC’s energy consumption. ∙ Always disconnect the AC power cord or switch the wall socket off if your PC would be left unused for a certain time to achieve zero energy consumption.
4 5 6 7 12 Windows 11 System Operations
8 9 10 Windows 11 System Operations 13
Network Connections Wi-Fi 1. Right-click [Start] and select [Network Connections] from the list. 2. Select and turn on [Wi-Fi]. 3. Select [Show available networks]. A list of available wireless networks pops up. Choose a connection from the list. 4. To establish a new connection, select [Manage known networks]. 5. Select [Add network]. 6. Enter information for the wireless network you intend to add and click [Save] to establish a new connection.
3 4 Windows 11 System Operations 15
5 6 16 Windows 11 System Operations
Ethernet 1. Right-click [Start] and select [Network Connections] from the list. 2. Select [Ethernet]. 3. The [IP assignment] and [DNS server assignment] are automatically set as [Automatic (DHCP)]. 4. For a Static IP connection, click [Edit] of [IP assignment]. 5. Select [Manual]. 6. Switch on the [IPv4] or [IPv6]. 7. Type the information from your Internet Service Provider and click [Save] to establish a Static IP connection.
4 3 5 18 Windows 11 System Operations
6 7 Windows 11 System Operations 19
Dial-up 1. Right-click [Start] and select [Network Connections] from the list. 2. Select [Dial-up]. 3. Select [Set up a new connection]. 4. Choose [Connect to the Internet] and click [Next]. 5. Select [Broadband (PPPoE)] to connect using DSL or cable that requires a user name and password. 6. Type the information from your Internet Service Provider (ISP) and click [Connect] to establish your LAN connection.
3 4 5 6 Windows 11 System Operations 21
System Recovery The purposes for using the System Recovery Function may include: ∙ Restore the system back to the initial status of original manufacturer’s default settings. ∙ When some errors have occurred to the operating system in use. ∙ When the operating system is affected by virus and is not able to work normally. ∙ When you want to install the OS with other built-in languages.
3 4 Windows 11 System Operations 23
F3 Hotkey Recovery (Optional) Precautions for Using the System Recovery Function 1. If your hard drive and system encountered non-recoverable problems, please use the F3 Hotkey recovery from the Hard Drive first to perform the System Recover Function. 2. Before using the System Recovery Function, please back up the important data saved on your system drive to other storage devices. Recovering the system with the F3 Hotkey Follow the instructions below to continue: 1. Restart the PC. 2.
Safety Instructions ∙ Read the safety instructions carefully and thoroughly. ∙ All cautions and warnings on the device or User Guide should be noted. ∙ Refer servicing to qualified personnel only. Power ∙ Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V before connecting the device to the power outlet. ∙ If the power cord comes with a 3-pin plug, do not disable the protective earth pin from the plug.
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/ Environment ∙ To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators. ∙ Use this device only on a hard, flat and steady surface.
Regulatory Notices CE Conformity Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable: ∙ RED 2014/53/EU ∙ Low Voltage Directive 2014/35/EU ∙ EMC Directive 2014/30/EU ∙ RoHS Directive 2011/65/EU ∙ ErP Directive 2009/125/EC Compliance with these directives is assessed using applicable European Harmonized Standards. The point of contact for regulatory matters is MSI-Europe: Eindhoven 5706 5692 ER Son.
FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Chemical Substances Information In compliance with chemical substances regulations, such as the EU REACH Regulation (Regulation EC No. 1907/2006 of the European Parliament and the Council), MSI provides the information of chemical substances in products at: https://csr.msi.
Green Product Features ∙ Reduced energy consumption during use and stand-by ∙ Limited use of substances harmful to the environment and health ∙ Easily dismantled and recycled ∙ Reduced use of natural resources by encouraging recycling ∙ Extended product lifetime through easy upgrades ∙ Reduced solid waste production through take-back policy Environmental Policy ∙ The product has been designed to enable proper reuse of parts and recycling and should not be thrown away at its end of life.
Copyright and Trademarks Notice Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names mentioned may be trademarks of their respective owners. No warranty as to accuracy or completeness is expressed or implied. MSI reserves the right to make changes to this document without prior notice.
