Specifications

PM-1033
HM86508 Flat Panel Control Module
8
2.3 JUMPER SETTING
• JP1 JP2 JP3 JP4: Disk On Chip Memory Address
FUNCTION JP1 JP2 JP3 JP4
CE000H 1-2 2-3 2-3 3-4
D6000H 1-2 2-3 2-3 5-6
DE000H 1-2 2-3 2-3 7-8
• JP5 : SELECT FLASHROM SEGMENT
The Flash ROM used on PM-1033 is 64K Flash ROM. It is divided
into two segment, 32K each, BIOS 1 and BIOS 2.
JP5 DESCRIPTION
1-2 BIOS 1
2-3 BIOS 2
Note: PM-1033 is equipped with one BIOS diskette which
contains the following files:
File Name BIOS 1 BIOS 2
5081.HMC
640 x 480 TFT
640 x 480 DSTN
5082.HMC 800 x 600 TFT 640 x 480 DSTN
PM-1033 is initially installed with 5081.HMC. The BIOS can be
programmed or updated with the other *.HMC files by using an
EPROM programmer.
• JP7 : VEE SELECTION (for LCD type DSTN/MONO)
FUNCTION JP7
+VEE 1-2
-VEE 2-3
+VEE = +5V ~ +40V
-VEE = -0V ~ -40V
User must read the specification of the LCD panel to know the
polarity and bias voltage of the LCD panel. The bias voltage can
be set from R19.