Specifications

PM-1033
HM86508 Flat Panel Control Module
7
2.2 Unpacking Precautions
ü Some components on PM-1033 are very sensitive to static
electric charges and can be damaged by a sudden rush of power.
Ground yourself to remove any static charge before touching your
PM-1033. You can do it by using a grounded wrist strap at all
times or by frequently touching any conducting materials that is
connected to the ground.
ü Disconnect power supply before handling and doing connection
on PM-1033. Do not plug any connector or jumper while the
power is on. It will cause fatal damage to your LCD panel.
ü Make sure that every connector is connected in correct direction.
Any incorrect connection may cause smoke or burn of electrical
parts or fatal damage of your LCD panel.