Specifications

PM-1033

HM86508 Flat Panel Control Module

Software (driver) Installation :

If this is the first time you install Windows, please plug the

PM-1033 into the PC/104 (in POWER OFF condition)

then start to install the Windows. After the installation

complete, press the button > Settings > Control

Panel. Select the Display Icon and then press Settings

Menu and press the Advanced button. Press Adapter

Menu and then press the Change button. Windows will go

into Update Device Driver Wizard, press Next button and

then check on: Display a list of all the drivers in a specific

location, so you can select the driver you want. Then

press Have Disk button and browse or select the correct

driver from the diskette. Choose the HM86508 driver from

the disk under the NT40, WIN31 or WIN95 directory,

depending on the Windows version that you install.

For hard disk, which has been installed by another VGA

driver before, to update the driver: under Control Panel,

select System icon then press Device Manager Menu.

Remove the old display adapters and then install the new

driver using Add New Hardware wizard under the Control

Panel. Consult the Microsoft Windows User Manual for

the driver installation.