Datasheet

1. Retract the solution from a Web Application:
stsadm.exe -o retractsolution -name Bamboo.SiteCreationPlus.wsp –immediate –url http://WebApplicationUri:455
2. Execute the job. (If you have multiple Web front-end servers, then you must run the following on each front-end server.)
stsadm.exe -o execadmsvcjobs
3. Delete the solution from the SharePoint Solution Store (only after the solution is retracted from all Web Applications and the retract job is executed on each
Web front-end server):
stsadm.exe -o deletesolution -name Bamboo.SiteCreationPlus.wsp
The steps below show how to activate or deactivate site collection features or Web Application features. You must be a Site Collection Administrator to perform
these steps.
By default, necessary activations are handled automatically at the site collection level when PM Central is installed. If you opt out of the automatic activation, or if
you need to activate a feature manually for any other reason, you may do the following:
To manually activate one of the features:
1. After PM Central is installed on the SharePoint server, navigate to the top-level site. From the left side of the page, select
Site Actions > Site Settings > Site
Collection Administration > Site Collection Features.
Manually Activating Site Collection Features and Web Application Features
Activating Site Collection Features
Page
31
of
104
Simple Print
12/16/2010
http://store.bamboosolutions.com/OnlineDoc/Print.aspx?NodeID=1780