P67A-C45/ P67A-C43/ P67S-C43/ P67A-S40 series MS-7673 (v1.
Preface Copyright Notice The material in this document is the intellectual property of MICRO-STAR INTERNATIONAL. We take every care in the preparation of this document, but no guarantee is given as to the correctness of its contents. Our products are under continual improvement and we reserve the right to make changes without notice. Trademarks All trademarks are the properties of their respective owners. ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ MSI® is registered trademark of Micro-Star Int’l Co.,Ltd.
MS-7673 Safety Instructions Always read the safety instructions carefully. Keep this User’s Manual for future reference. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. The openings on the enclosure are for air convection hence protects the equipment from overheating. DO NOT COVER THE OPENINGS. ■ Make sure the voltage of the power source is at 110/220V before connecting the equipment to the power inlet.
Preface FCC-B Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
MS-7673 WEEE (Waste Electrical and Electronic Equipment) Statement ENGLISH To protect the global environment and as an environmentalist, MSI must remind you that... DEUTSCH Hinweis von MSI zur Erhaltung und Schutz unserer Umwelt Gemäß der Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte dürfen Elektro- und Elektronik-Altgeräte nicht mehr als kommunale Abfälle entsorgt werden.
Preface ESPAÑOL MSI como empresa comprometida con la protección del medio ambiente, recomienda: Bajo la directiva 2002/96/EC de la Unión Europea en materia de desechos y/o equipos electrónicos, con fecha de rigor desde el 13 de agosto de 2005, los productos clasificados como “eléctricos y equipos electrónicos” no pueden ser depositados en los contenedores habituales de su municipio, los fabricantes de equipos electrónicos, están obligados a hacerse cargo de dichos productos al termino de su período de vida
MS-7673 TÜRKÇE Çevreci özelliğiyle bilinen MSI dünyada çevreyi korumak için hatırlatır: ČESKY Záleží nám na ochraně životního prostředí - společnost MSI upozorňuje... Podle směrnice Evropské unie (“EU”) o likvidaci elektrických a elektronických výrobků 2002/96/EC platné od 13.
Preface Contents Copyright Notice �������������������������������������������������������������������������������������������� ii Trademarks ���������������������������������������������������������������������������������������������������� ii Revision History �������������������������������������������������������������������������������������������� ii Technical Support ����������������������������������������������������������������������������������������� ii Safety Instructions ����������������������
MS-7673 Français ����������������������������������������������������������������������������������������������������� Fr-1 Spécifications ������������������������������������������������������������������������������������������������������Fr-2 Guide Rapide Des Composants ��������������������������������������������������������������������������Fr-4 Processeur : CPU �����������������������������������������������������������������������������������������������Fr-6 Mémoire ���������������������������������
English P67A-C45/ P67A-C43/ P67S-C43/ P67A-S40 Series Europe version
MS-7673 Mainboard Mainboard Specifications Processor Support ■ Intel® processor in the LGA1155 package (For the latest information about CPU, please visit http://www.msi.com/index. php?func=cpuform2) Base Clock ■ 100 MHz Chipset ■ Intel® P67 chipset Memory Support ■ 4 DDR3 DIMMs support DDR3 2133*(OC)/ 1600*(OC)/ 1333/ 1066 DRAM (16GB Max) ■ Supports Dual-Channel mode *(For more information on compatible components, please visit http://www.msi.com/index.
Connectors Slots ■ 1 PCIE x16 slot ■ 3 PCIE x1 slots ■ 3 PCI slots Form Factor ■ ATX (30.5 cm X 21.5 cm) Mounting ■ 6 mounting holes * If you need to purchase accessories and request the part numbers, you could search the product web page and find details on our web address http://www.msi.com/index. php En-3 English ■ Back panel - 1 PS/2 keyboard/ mouse combo port - 8 USB 2.0 ports (for P67A-C45 / P67A-C43 / P67A-S40) 10 USB 2.
MS-7673 Mainboard Quick Components Guide SYSFAN1, En-17 JPWR2, En-12 CPUFAN, En-17 CPU, En-6 DDR3, En-10 SYSFAN4, En-17 JCI1, En-22 Back Panel, En-13 BATT + JPWR1, En-12 PCIE, En-25 SATA1~6, En-16 JBAT1, En-24 PCI, En-26 JCOM1, En-17 SYSFAN2, En-17 SYSFAN3, En-17 JAUD1, En-19 JDLED3, En-22 JFP1, JFP2, En-18 JCD1, En-21 JSP1, En-20 JUSB2, En-19 J1394_1, En-20 JUSB1, En-18 JTPM1, En-21 En-4
Screw Holes When you install the mainboard, you have to place the mainboard into the chassis in the correct direction. The locations of screws holes on the mainboard are shown as below. English BATT + The side has to toward the rear, the position for the I/O shield of the chassis. Screw holes Refer above picture to install standoffs in the appropriate locations on chassis and then screw through the mainboard screw holes into the standoffs.
MS-7673 Mainboard CPU (Central Processing Unit) When you are installing the CPU, make sure to install the cooler to prevent overheating. If you do not have the CPU cooler, consult your dealer before turning on the computer. For the latest information about CPU, please visit http://www.msi.com/index. php?func=cpuform2 Important Overheating Overheating will seriously damage the CPU and system. Always make sure the cooling fan can work properly to protect the CPU from overheating.
CPU & Cooler Installation When you are installing the CPU, make sure the CPU has a cooler attached on the top to prevent overheating. Meanwhile, do not forget to apply some thermal paste on CPU before installing the heat sink/cooler fan for better heat dispersion. Follow the steps below to install the CPU & cooler correctly. Wrong installation will cause the damage of your CPU & mainboard. 2. Lift the load lever up to fully open position. 3.
MS-7673 Mainboard 5. Visually inspect if the CPU is seated well into the socket. If not, take out the CPU with pure vertical motion and reinstall. 6. Engage the load lever while pressing down lightly onto the load plate. Alignment Key 7. Secure the lever near the hook end under the retention tab. 8. Make sure the four hooks are in porper position before you install the cooler. Important • Confirm if your CPU cooler is firmly installed before turning on your system.
10. Press the four hooks down to fasten the cooler. 11. Turn over the mainboard to confirm that the clip-ends are correctly inserted. 12. Finally, attach the CPU Fan cable to the CPU fan connector on the mainboard. English 9. Align the holes on the mainboard with the heatsink. Push down the cooler until its four clips get wedged into the holes of the mainboard. Mainboard Hook Important • Read the CPU status in BIOS.
MS-7673 Mainboard Memory These DIMM slots are used for installing memory modules. For more information on compatible components, please visit http://www.msi.com/index.php?func=testreport DDR3 240-pin, 1.5V 48x2=96 pin 72x2=144 pin Dual-Channel mode Population Rule In Dual-Channel mode, the memory modules can transmit and receive data with two data bus lines simultaneously. Enabling Dual-Channel mode can enhance the system performance.
Installing Memory Modules 1. The memory module has only one notch on the center and will only fit in the right orientation. 3. Manually check if the memory module has been locked in place by the DIMM slot clips at the sides. Notch Volt Important You can barely see the golden finger if the memory module is properly inserted in the DIMM slot. En-11 English 2. Insert the memory module vertically into the DIMM slot.
MS-7673 Mainboard Power Supply ATX 24-pin Power Connector: JPWR1 This connector allows you to connect an ATX 24-pin power supply. To connect the ATX 24-pin power supply, make sure the plug of the power supply is inserted in the proper orientation and the pins are aligned. Then push down the power supply firmly into the connector. You may use the 20-pin ATX power supply as you like. If you’d like to use the 20-pin ATX power supply, please plug your power supply along with pin 1 & pin 13. d n u ro V .
Back Panel For P67A-C45 Keyboard/ Mouse Optical S/PDIF-Out IEEE 1394 Port LAN Line-In RS-Out USB 2.0 Port Mic USB 2.0 Port Coaxial USB 2.0 Port S/PDIF-Out USB 2.0 Port SS-Out USB 3.0 Port Clear CMOS button For P67A-C43 Keyboard/ Mouse LAN Optical S/PDIF-Out Line-In RS-Out USB 2.0 Port Line-Out CS-Out Mic USB 2.0 Port Coaxial USB 2.0 Port S/PDIF-Out USB 2.0 Port SS-Out USB 3.0 Port Clear CMOS button For P67S-C43 Keyboard/ Mouse LAN Optical S/PDIF-Out Line-In RS-Out USB 2.
MS-7673 Mainboard ▶ Mouse/Keyboard The standard PS/2® mouse/keyboard DIN connector is for a PS/2® mouse/keyboard. ▶ Clear CMOS Button (optional) There is a CMOS RAM on board that has a power supply from external battery to keep the system configuration data. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, use the button to clear data. Press the button to clear the data.
▶ LAN The standard RJ-45 LAN jack is for connection to the Local Area Network (LAN). You can connect a network cable to it. Yellow Green/ Orange Color LED State Condition Left Yellow Off LAN link is not established. On(Steady state) LAN link is established. On(brighter & pulsing) The computer is communicating with another computer on the LAN. Off 10 Mbits/sec data rate is selected. On 100 Mbits/sec data rate is selected. On 1000 Mbits/sec data rate is selected.
MS-7673 Mainboard Connectors Serial ATA Connector: SATA1~6 This connector is a high-speed Serial ATA interface port. Each connector can connect to one Serial ATA device. * The MB layout in this figure is for reference only. SATA1_2 SATA3_4 SATA5 SATA1~2 (6 Gb/s) supported by Intel® P67 SATA3~6 (3 Gb/s) supported by Intel® P67 SATA6 Important Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may occur during transmission.
Fan Power Connectors: CPUFAN,SYSFAN1~4 The fan power connectors support system cooling fan with +12V. When connecting the wire to the connectors, always note that the red wire is the positive and should be connected to the +12V; the black wire is Ground and should be connected to GND. If the mainboard has a System Hardware Monitor chipset on-board, you must use a specially designed fan with speed sensor to take advantage of the CPU fan control. English d o n u /N ro 2V or .G 1 ns 1 + e . 2 .
MS-7673 Mainboard Front Panel Connectors: JFP1, JFP2 These connectors are for electrical connection to the front panel switches and LEDs. The JFP1 is compliant with Intel® Front Panel I/O Connectivity Design Guide. P o w e r in P o 8. + . .N 6 0 . 4 + . 2 e ch w it o w 1 S P Spe r r E D Buz zer 2 .+ 8 .6 .+ 4 L .D D in E LE P rL d o e n .N w e d 7 .Po sp n 5 Su rou . 3 .G 1 ch it w d e tS rv e D s E se e L e R D .R D 9 .+ H 7 .5 . 3 .+ 1 JFP1 ake JFP2 Front USB 2.
Front USB 3.0 Connector: JUSB2 USB 3.0 port is backward-compatible with USB 2.0 devices. Supports data transfer rate up to 5 Gbit/s (SuperSpeed). 115V English 1 N C D P C _ in V 4 _D DN P _ X 4 _ P o B _R X C D _ _ .N S 3 R 4 C 0 U B _ 2 .F S B3 nd X 4_ T 9 1 8.U S ou _ X 1 7.U r B3 _T 1 6.G S B3 nd 1 .U S u o 5 1 4.U r D1 + 1 3.G B D1 1 2.S B 1 1.S 1 2 N C D C _ P V 3 D DN _ X 3_ _ P B R X C D S _ R _ _ U B3 _ 3 C .F S 3 d X _ 1 .U SB un T 3 2 .U ro 3_ TX 3 .G SB 3_ d 4 .U B n 5 US rou 0. 6 .
MS-7673 Mainboard S/PDIF-Out Connector: JSP1 This connector is used to connect S/PDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission. 115V d n u F ro DI .G P 1 .S CC 2 .V 3 * The MB layout in this figure is for reference only. S/PDIF-Out Bracket (optional) IEEE1394 Connector: J1394_1 (optional) This connector allows you to connect the IEEE1394 device via an optional IEEE1394 bracket. * The MB layout in this figure is for reference only.
TPM Module connector: JTPM1 This connector connects to a TPM (Trusted Platform Module) module (optional). Please refer to the TPM security platform manual for more details and usages. English 3 in p 2 ta in a p 1 d ta pin 0 n e s & da ta pi m s & da ta a ra re s F d s & d C ad dre ss & P re s .L C d d s 3 P a d re 1 1.L C a dd et 1 .LP C a es k 9 .LP C R loc 7 .LP C C 5 .L P C 3 .LP 1 d n u nd r ro u n r e .G ro Pi we Q r ow 4 1 2 . G o P o IR w e y p 1 .N V ial o b 0 1 .5 er P nd 8 S 3V ta . 6 3. S .
MS-7673 Mainboard DLED3 Connector: JDLED3 (optional) This is reserved for connecting the MSI future control card. in p d n d u rve ro se d in p .G e n l in u p 3 1 .R o tro l in r 11 .G on tro l p o n 9 C tr . 7 .Co n B o 5 C S . 3 .5V 1 in p n l i o p tr l n n o o ntr n pi .C o Pi ol n 4 1 2.C o tr d pi n 1 .N on un l pi 0 1 .C ro tro l 8 .G n ro t 6 Co n . 4 .Co 2 Chassis Intrusion Connector: JCI1 This connector connects to the chassis intrusion switch cable.
LED Status Indicators (optional) BATT + English CPU Power Phase LED These LEDs indicate the current CPU power phase mode. Follow the instructions below to read. Lights Off CPU is in 3 phase power mode. CPU is in 4 phase power mode.
MS-7673 Mainboard Jumper Clear CMOS Jumper: JBAT1 There is a CMOS RAM onboard that has a power supply from an external battery to keep the data of system configuration. With the CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, set the jumper to clear data. 1 JBAT1 1 Keep Data 1 Clear Data Important You can clear CMOS by shorting 2-3 pin while the system is off. Then return to 12 pin position.
Slots PCIE (Peripheral Component Interconnect Express) Slot The PCIE slot supports the PCIE interface expansion card. English PCIE x16 Slot PCIE x1 Slot Important When adding or removing expansion cards, make sure that you unplug the power supply first. Meanwhile, read the documentation for the expansion card to configure any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration.
MS-7673 Mainboard PCI (Peripheral Component Interconnect) Slot The PCI slot supports LAN card, SCSI card, USB card, and other add-on cards that comply with PCI specifications. 32-bit PCI Slot Important When adding or removing expansion cards, make sure that you unplug the power supply first. Meanwhile, read the documentation for the expansion card to configure any necessary hardware or software settings for the expansion card, such as jumpers, switches or BIOS configuration.
BIOS Setup Important • The items under each BIOS category described in this chapter are under continuous update for better system performance. Therefore, the description may be slightly different from the latest BIOS and should be held for reference only. • Upon boot-up, the 1st line appearing after the memory count is the BIOS version. It is usually in the format: E7673IMS.xxx 103010 where: 1st digit refers to BIOS type as E = EFI 2nd - 5th digit refers to the model number.
MS-7673 Mainboard Control Keyboard Mouse <↑ ↓ > Description Select Item Move the cursor Select Icon/ Field Click/ Doubleclick the left button Jumps to the Exit menu or returns to the previous from a submenu Click the right button <+> Increase the numeric value or make changes <-> Decrease the numeric value or make changes General Help CPU Specifications Enter Memory-Z Load optimized defaults Save Change and Reset Exit Sub-Menu If you fin
The Main Menu Once you enter BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from the setup functions. English ▶ Language After entering the Setup menu, you can see a “Language” button. Please click it and select the language, at your desire, for the BIOS setting first. ▶ Green Power Click “Green Power” icon to enter the menu. Use this menu to specify the power phase. ▶ Utility Click “Utility” icon to enter the menu.
MS-7673 Mainboard When enter the BIOS Setup utility, follow the processes below for general use. 1. Load Optimized Defaults : Select [Setting] -> [Save & Exit] -> [Restore Defaults] and click on it. And then the screen shows a pop-up message as below. Select [Yes] and click on it to load the default settings for optimal system performance. 2. Setup Date/ Time : Select [Setting] -> [System Status] -> [System Date]/ [System Time] and click on it.
4. OC Menu Introduction : This menu is for advanced user who want to overclock the mainboard. English ▶ Current CPU / DRAM Frequency These items show the current clocks of CPU and Memory speed. Read-only. ▶ CPU Base Frequency [10KHz] This item allows you to set the CPU Base clock (in 10KHz). You may overclock the CPU by adjusting this value. Please note the overclocking behavior is not guaranteed.
MS-7673 Mainboard ▶ DRAM Ratio This setting controls the ratio of memory frequency to enable the memory to run at different frequency combinations. ▶ Adjusted DRAM Frequency It shows the adjusted DRAM frequency. Read-only. ▶ Extreme Memory Profile(X.M.P) This item is used to enable/disable the Intel Extreme Memory Profile (XMP). For further information please refer to Intel’s official website.
▶ tWTR Minimum time interval between the end of write data burst and the start of a column-read command. It allows I/O gating to overdrive sense amplifiers before read command starts. ▶ tRRD Specifies the active-to-active delay of different banks. English ▶ tRTP Time interval between a read and a precharge command. ▶ tFAW This item is used to set the tFAW (four activate window delay) timing. ▶ tWCL This item is used to set the tWCL (Write CAS Latency) timing.
MS-7673 Mainboard ▶ MEMORY-Z Press to enter the sub-menu. ▶ DIMM1~4 Memory SPD Press to enter the sub-menu. The sub-menu displays the informations of installed memory. ▶ X.M.P Support Information Press to enter the sub-menu. These items display the current status of the X.M.P support information. Read only. ▶ CPU Feature Press to enter the sub-menu.
▶ Intel Virtualization Tech This item is used to enable/disable the Intel Virtualization technology. For further information please refer to Intel’s official website. ▶ Power Technology This item allows you to select the Intel Dynamic Power technology mode. ▶ OverSpeed Protection Overspeed Protection function can monitor the current CPU draws as well as its power consumption. If it exceeds a certain level, the processor automatically reduces its clock speed.
MS-7673 Mainboard Software Information Take out the Driver/Utility DVD that is included in the mainboard package, and place it into the DVD-ROM drive. The installation will auto-run, simply click the driver or utility and follow the pop-up screen to complete the installation. The Driver/Utility DVD contains the: - Driver menu : It provides available drivers. Install the driver by your desire and to activate the device. - Utility menu : It allows you to install the available software applications.
Deutsch P67A-C45/ P67A-C43/ P67S-C43/ P67A-S40 Serie Europe Version
MS-7673 Mainboard Spezifikationen Prozessoren ■ Intel® Prozessor für Sockel LGA1155 (Weitere CPU Informationen finden php?func=cpuform2) Sie unter http://www.msi.com/index. Base-Taktsteuerung ■ 100 MHz Chipsatz ■ Intel® P67 Chipsatz Speicher ■ 4 DDR3 DIMMs unterstützen DDR3 2133*(OC)/ 1600*(OC)/ 1333/ 1066 DRAM (max. 16GB) ■ Unterstützt die Modus Dual-Kanal *(Weitere Informationen zu kompatiblen Speichermodulen finden Sie unter http://www.msi.com/index.
Anschlüsse Steckplätze ■ 1 PCIE x16-Steckplatz ■ 3 PCIE x1-Steckplätze ■ 3 PCI-Steckplätze Form Faktor ■ ATX (30,5 cm X 21,5 cm) Montage ■ 6 Montagebohrungen *Wenn Sie für Bestellungen von Zubehör Teilenummern benötigen, finden Sie diese auf unserer Produktseite unter http://www.msi.com/index.php De-3 Deutsch ■ Hintere Ein-/ und Ausgänge - 1 PS/2 Tastatur/Maus Combo-Anschluss - 8 USB 2.0 Anschlüsse (für P67A-C45 / P67A-C43 / P67A-S40) 10 USB 2.
MS-7673 Mainboard Komponenten-Übersicht SYSFAN1, De-17 JPWR2, De-12 CPUFAN, De-17 CPU, De-6 DDR3, De-10 SYSFAN4, De-17 JCI1, De-22 Rücktafel, De-13 BATT + JPWR1, De-12 PCIE, De-25 SATA1~6, De-16 JBAT1, De-24 PCI, De-26 JCOM1, De-17 SYSFAN2, De-17 SYSFAN3, De-17 JAUD1, De-19 JDLED3, De-22 JFP1, JFP2, De-18 JCD1, De-21 JSP1, De-20 JUSB2, De-19 J1394_1, De-20 JUSB1, De-18 JTPM1, De-21 De-4
Schraubenlöcher Wenn Sie das Mainboard zu installieren, müssen Sie das Mainboard in das Chassis in der korrekten Richtung setzen. Die Standorte von Schraubenlöchern auf dem Mainboard sind wie nachfolgend gezeigt. Deutsch BATT + Die Seite muss nach hinten, die Position für die E/A-Abschirmung des Chassis. Schraubenlöcher Verweisen Sie das obige Bild, um Abstandshalter in den entsprechenden Orten auf Chassis installieren und dann Schraube durch das Mainboard Schraubenlöcher in den Abstandshaltern.
MS-7673 Mainboard CPU (Prozessor) Wenn Sie die CPU einbauen, stellen Sie bitte sicher, dass Sie auf der CPU einen Kühler anbringen, um Überhitzung zu vermeiden. Verfügen Sie über keinen Kühler, setzen Sie sich bitte mit Ihrem Händler in Verbindung, um einen solchen zu erwerben und zu installieren. Um die neuesten Informationen zu unterstützten Prozessoren zu erhalten, besuchen Sie bitte http://www.msi.com/index.php?func=cpuform2 Wichtig Überhitzung Überhitzung beschädigt die CPU und das System nachhaltig.
CPU & Kühler Einbau Wenn Sie die CPU einbauen, stellen Sie bitte sicher, dass Sie auf der CPU einen Kühler anbringen, um Überhitzung zu vermeiden. Vergessen Sie nicht, etwas Siliziumwärmeleitpaste auf die CPU aufzutragen, bevor Sie den Prozessorkühler installieren, um eine Ableitung der Hitze zu erzielen. Folgen Sie den Schritten unten, um die CPU und den Kühler ordnungsgemäß zu installieren. Ein fehlerhafter Einbau führt zu Schäden an der CPU und dem Mainboard. 2.
MS-7673 Mainboard 5. Begutachten Sie, ob die CPU richtig im Sockel sitzt. Falls nicht, ziehen Sie die CPU durch eine rein vertikale Bewegung wieder heraus. Versuchen Sie es erneut. 6. Schließen Sie die Abdeckung des Sockels und drücken Sie den Verschlusshebel mit leichtem Druck nach unten. Justiermarkierungen 7. Arretieren Sie den Hebel unter dem Rückhaltehaken des CPU-Sockels. 8. Kontrollieren Sie die vier Haken sind in richtiger Position, bevor Sie die Kühlvorrichtung anbringen.
10. Führen Sie den CPU-Kühler über den CPU-Sockel. 11. Drehen Sie das Mainboard um und vergewissern Sie sich, dass das der Kühler korrekt installiert ist. 12. Schließlich verbinden Sie das Stromkabel des CPU Lüfters mit dem Anschluss auf dem Mainboard. Deutsch 9. Drücken Sie den Verschlusshebel mit leichtem Druck nach unten und arretieren Sie den Hebel unter dem Rückhaltehaken des CPU-Sockels. Mainboard Haken Wichtig • Prüfen Sie die Status der CPU im BIOS.
MS-7673 Mainboard Speicher Diese DIMM-Steckplätze nehmen Arbeitsspeichermodule auf. Die neusten Informationen über kompatible Bauteile finden Sie unter http://www.msi.com/index. php?func=testreport DDR3 240-polig, 1,5V 48x2=96 Pole 72x2=144 Pole Populationsregeln für Dual-Kanal-Speicher Im Dual-Kanal-Modus können Arbeitsspeichermodule Daten über zwei Datenbusleitungen gleichzeitig senden und empfangen. Durch Aktivierung des Dual-Kanal-Modus wird die Leistung Ihres Systems verbessert.
Vorgehensweise beim Einbau von Speicher Modulen 1. Die Speichermodulen haben nur eine Kerbe in der Mitte des Moduls. Sie passen nur in einer Richtung in den Sockel. 2. Stecken Sie das Arbeitsspeichermodul senkrecht in den DIMM-Steckplatz ein. Drücken Sie anschließnd das Arbeitsspeichermodul nach unten, bis die Kontaktseite richtig tief in dem DIMM-Steckplatz sitzt. Der Kunststoffbügel an jedem Ende des DIMM-Steckplatzes schnappt automatisch ein, wenn das Arbeitsspeichermodul richtig eingesetzt ist. 3.
MS-7673 Mainboard Stromversorgung ATX 24-poliger Stromanschluss: JPWR1 Mit diesem Anschluss verbinden Sie den ATX 24-poligen Anschluss des Netzteils. Achten Sie bei dem Verbinden des ATX 24-poligen Stromanschlusses darauf, dass der Anschluss des Netzteils richtig auf den Anschluss an der Hauptplatine ausgerichtet ist. Drücken Sie dann den Anschluss des Netzteils fest nach unten, um eine richtige Verbindung zu gewährleisten. Sie können auch den 20-poligen ATX-Stromanschluss des Netzteils verwenden.
Rücktafel Für P67A-C45 Tastatur/ Maus Optischer S/PDIFAusgang IEEE 1394 Anschluss LAN USB 2.0 Anschluss Line-In RS-Out Line-Out CS-Out Für P67A-C43 Tastatur/ Maus Mic USB 2.0 Anschluss USB 2.0 Anschluss Optischer S/PDIFAusgang SS-Out USB 3.0 Anschluss Deutsch Koaxialer S/PDIFAusgang CMOS leeren-Taste USB 2.0 Anschluss LAN USB 2.0 Anschluss Line-In RS-Out Line-Out CS-Out Koaxialer S/PDIFAusgang CMOS leeren-Taste USB 2.0 Anschluss Für P67S-C43 Tastatur/ Maus Mic USB 2.0 Anschluss USB 2.
MS-7673 Mainboard ▶ Maus/Tastatur Die Standard PS/2® Maus/Tastatur Stecker Mini DIN ist für eine PS/2® Maus/Tastatur. ▶ CMOS leeren-Taste (optional) Auf dem Mainboard befindet sich ein CMOS RAM, dass durch eine zusätzliche Batterie versorgt wird um Daten der Systemkonfiguration zu speichern. Mit diesem CMOS RAM kann das System bei Betätigung des Netzschalters jederzeit automatisch hochgefahren werden.
▶ LAN Die Standard RJ-45 Buchse ist für Anschlus zum an ein Lokales Netzwerk (Local Area Network LAN). Hier kann ein Netzwerkkabel angeschlossen werden. Gelb Grün/ Orange Farbe LED Status Zustand Links Gelb Aus Keine Verbindung mit dem LAN. An (Dauerleuchten) Verbindung mit dem LAN. An (heller & pulsierend) Der Computer kommuniziert mit einem anderen Rechner im LAN. Aus Gewählte Datenrate 10 MBit/s. An Gewählte Datenrate 100 MBit/s. An Gewählte Datenrate 1000 MBit/s.
MS-7673 Mainboard Anschlüssen Serial ATA Anschluss: SATA1~6 Der Anschluss ist eine Hochgeschwindigkeitsschnittstelle der Serial ATA. Pro Anschluss kann ein S-ATA Gerät angeschlossen werden. * Das MB-Layout in dieser Abbildung haben nur Orientierungscharakter.
Stromanschlüsse für Lüfter: CPUFAN,SYSFAN1~4 Die Anschlüsse unterstützen aktive Systemlüfter mit +12V. Wenn Sie den Anschluss herstellen, sollten Sie immer darauf achten, dass der rote Draht der positive Pol ist, und mit +12V verbunden werden sollte. Der schwarze Draht ist der Erdkontakt und sollte mit GND verbunden werden.
MS-7673 Mainboard Frontpanel Anschlüsse: JFP1, JFP2 Diese Anschlüsse sind für das Frontpanel. Sie dienen zum Anschluss der Schalter und LEDs des Frontpanels. JFP1 erfüllt die Anforderungen des “Intel® Front Panel I/O Connectivity Design Guide”. P o w e r in P o 8. + . .N 6 0 . 4 + . 2 e ch w it o w 1 S P Spe r r E D Buz zer 2 .+ 8 .6 .+ 4 L .- JFP2 D D in E LE P rL d o e n .N w e d 7 .Po sp n 5 Su rou . 3 .G 1 ch it w d e tS rv e D s E se e L e R D .R D 9 .+ H 7 .5 . 3 .
USB 3.0 Vorderanschluss: JUSB2 Der USB 3.0 Anschluss ist abwärtskompatibel mit USB 2.0-Geräten. Unterstützt Datentransferraten bis 5 Gbit/s (SuperSpeed). 115V 1 N C D P C _ in V 4 _D DN P _ X 4 _ P o B _R X C D _ _ .N S 3 R 4 C 0 U B _ 2 .F S B3 nd X 4_ T 9 1 8.U S ou _ X 1 7.U r B3 _T 1 6.G S B3 nd 1 .U S u o 5 1 4.U r D1 + 1 3.G B D1 1 2.S B 1 1.S 1 USB 3.
MS-7673 Mainboard S/PDIF-Ausgang: JSP1 Die S/PDIF (Sony & Philips Digital Interconnect Format) Schnittstelle wird für die Übertragung digitaler Audiodaten verwendet. 115V d n u F ro DI .G P 1 .S CC 2 .V 3 * Das MB-Layout in dieser Abbildung haben nur Orientierungscharakter. S/PDIF-Ausgang Slotblech (optional) IEEE1394 Anschluss: J1394_1 (optional) Mit diesem Anschluss verbinden Sie ein optionales IEEE 1394-Slotblech, das den Anschluss eines IEEE 1394-Gerätes ermöglicht.
TPM Anschluss: JTPM1 Dieser Anschluss wird für das optionale TPM Modul (Trusted Platform Module) verwendt. Weitere Informationen über den Einsatz des optionalen TPM Modules entnehmen Sie bitte dem TPM Plattform Handbuch. Deutsch 3 in p 2 ta in a p 1 d ta pin 0 n e s & da ta pi m s & da ta a ra re s F d s & d C ad dre ss & P re s .L C d d s 3 P a d re 1 1.L C a dd et 1 .LP C a es k 9 .LP C R loc 7 .LP C C 5 .L P C 3 .LP 1 d n u nd r ro u n r e .G ro Pi we Q r ow 4 1 2 . G o P o IR w e y p 1 .
MS-7673 Mainboard DLED3 Anschluss: JDLED3 (optional) Dieser Anschluss ist für Verbindung der zukünftigen Steuerkarte von MSI reserviert. in p d n d u rve ro se d in p .G e n l in u p 3 1 .R o tro l in r 11 .G on tro l p o n 9 C tr . 7 .Co n B o 5 C S . 3 .5V 1 in p n l i o p tr l n n o o ntr n pi .C o Pi ol n 4 1 2.C o tr d pi n 1 .N on un l pi 0 1 .C ro tro l 8 .G n ro t 6 Co n . 4 .Co 2 Gehäusekontaktanschluss: JCI1 Dieser Anschluss wird mit einem Kontaktschalter verbunden.
LED Statusanzeige (optional) BATT + Deutsch CPU Power Phase LED Diese LEDs zeigen den gegenwärtigen CPU Auslastungsgrad an. Lesen Sie die folgenden Anweisungen. Leuchtet Aus CPU ist in der Phase 3 des Power-Modus. CPU ist in der Phase 4 des Power-Modus.
MS-7673 Mainboard Steckbrücke Steckbrücke zur CMOS- Löschung: JBAT1 Der Onboard CMOS Speicher (RAM) wird über eine zusätzliche Betterie mit Strom versorgt, um die Daten der Systemkonfiguration zu speichern. Er ermöglicht es dem Betriebssystem, mit jedem Einschalten automatisch hochzufahren. Wenn Sie die Systemkonfiguration löschen wollen, müssen Sie die Steckbrücke für kurze Zeit umsetzen. Halten Sie sich an die Anweisungen in der Grafik, um die Daten löschen.
Steckplätze PCIE (Peripheral Component Interconnect Express) Steckplatz Der PCIE-Steckplatz unterstützt eine Erweiterungskarte mit der PCIE-Schnittstelle. PCIE x16-Steckplatz Deutsch PCIE x1-Steckplatz Wichtig Achten Sie darauf, dass Sie zuerst das Netzkabel aus der Steckdose herausziehen, bevor Sie eine Erweiterungskarte installieren oder entfernen.
MS-7673 Mainboard PCI (Peripheral Component Interconnect) Steckplatz Der PCI-Steckplatz kann LAN-Karten, SCSI-Karten, USB-Karten und sonstige Zusatzkarten aufnehmen, die mit den PCI-Spezifikationen konform sind. 32-Bit PCI-Steckplatz Wichtig Achten Sie darauf, dass Sie zuerst das Netzkabel aus der Steckdose herausziehen, bevor Sie eine Erweiterungskarte installieren oder entfernen.
BIOS Setup Dieses Kapitel enthält Informationen über das BIOS Setup und ermöglicht es Ihnen, Ihr System optimal auf Ihre Anforderungen einzustellen. Notwendigkeit zum Aufruf des BIOS besteht, wenn: ■ Während des Bootvorgangs des Systems eine Fehlermeldung erscheint und Sie zum Aufruf des BIOS SETUP aufgefordert werden. ■ Sie die Werkseinstellungen zugunsten individueller Einstellungen ändern wollen.
MS-7673 Mainboard Steuertasten Tastatur Maus <↑ ↓ > Beschreibung Auswahl eines Eintrages Bewegen Sie den Cursor Auswahl eines Symbols/ Feldes Klicken/ doppelt-klicken Sie mit der linken Maustaste Aufruf Exit Menü oder zurück zum Hauptmenü von Untermenü Klicken Sie mit der rechten Maustaste <+> Hochzählen oder ändern eines Wertes <-> Herunterzählen oder ändern eines Wertes Allgemeine Hilfe CPU-Spezifikationen Aufruf des Memory-Z Fensters mit Details zum Speicher
Das Hauptmenü Nachdem Sie das BIOS CMOS Setup Utility, aufgerufen haben, erscheint das Hauptmenü. Es weist fünf Setup-Funktionen. Deutsch ▶ Language Nach der Eingabe des Einstellungsmenü können Sie eine Schaltfläche “Language”. Bitte klicken Sie darauf und wählen Sie die Sprache für die BIOS-Einstellung. ▶ Green Power Klicken Sie auf das “Green Power”-Symbol, um in das Menü zu gelangen. Verwenden Sie dieses Menü, um die Power-Phase anzugeben und Einstellungen vorzunehmen.
MS-7673 Mainboard Wenn Sie das BIOS Dienstprogramm öffnen, folgen Sie den untenstehenden Anweisungen. 1. Laden der gespeicherten Werkseinstellung : Wählen Sie [Setting] -> [Save & Exit] -> [Restore Defaults] und klicken auf diese Schaltfläche. Und dann zeigt der Bildschrim die folgende PopUp-Meldung. Wählen Sie [Yes (Ja)] und klicken darauf, um die Standardeinstellungen für eine sichere Systemleistung zu laden. 2.
4. OC Menü Einführung: In diesem Menü können Benutzer das BIOS anpassen und übertakten. Bitte führen Sie nur Änderungen durch, wenn Sie sich über das Ergebniss sicher sind. Sie sollten Erfahrung beim Übertakten haben, da Sie sonst das Mainboard oder Komponenten des Systems beschädigen können. Deutsch ▶ Current CPU / DRAM Frequency Zeigt den derzeitige Takt der CPU und die Geschwindigkeit des Speichers an. Nur Anzeige – keine Änderung möglich.
MS-7673 Mainboard nahme bestehen. Die Leistung kann dynamisch erhöht oder reduziert werden. Diese Technologie ist ein Bestandteil neuer Intel Prozessoren. ▶ DRAM Ratio Die Einstellung steuert das Verhältnis der Speicher-Frequenz, um unterschiedliche Kombinationen der Speicherfrequenzen einzustellen. ▶ Adjusted DRAM Frequency Zeigt die Speicherfrequenz an. Nur Anzeige – keine Änderung möglich. ▶ Extreme Memory Profile(X.M.P) Hier können Sie das Intel Extreme-Memory-Profile (X.M.P.) aktivieren/ deaktivieren.
▶ tWR Minimum Intervall zwischen dem Datenflussende und dem Beginn eines vorgeladenen Befehls. Erlaubt die Wiederherstellung der Daten in die Zellen. ▶ tWTR Minimum Intervall zwischen dem Datenflussende und dem Beginn eines Spaltenlesebefehls. Es gestattet den I/O Ansteuerungssignalen die Datenwiederherstellung der Zelle vor dem Lesebefehl zu überschreiben. ▶ tRRD Legt die Aktiv-zu-Aktiv Verzögerung für unterschiedliche Bänke fest. ▶ tFAW Einstellen des tFAW -Zeitintervalls (four activate window delay).
MS-7673 Mainboard ▶ CPU Specifications Drücken Sie die Eingabetaste , um das Untermenü aufzurufen. Das Untermenü zeigt die Information des verwendeten Prozessors an. ▶ CPU Technology Support Drücken Sie die Eingabetaste , um das Untermenü aufzurufen. Das Untermenü zeigt die Technologien des verwendeten Prozessors an. ▶ MEMORY-Z Drücken Sie die Eingabetaste , um das Untermenü aufzurufen. ▶ DIMM1~4 Memory SPD Drücken Sie die Eingabetaste , um das Untermenü aufzurufen.
tete “Buffer Overflow” Angriffe verhindern, wenn das Betriebssystem die CPU-Eigenschaft unterstützt. Die Option der CPU erlaubt die Steuerung in welchen Bereichen des Speicher Behle ausgeführt und welche blockiert werden können. Wird ein schadhafter Befehl in den Speicher geladen verhindert die CPU-Funktion die Ausführung des Befehls, um vor Schäden oder Verbreitung von Viren / Würmern zu schützen. ▶ Intel Virtualization Tech Hier können Sie die Intel Virtualisierungs-Technologie aktivieren/ deaktivieren.
MS-7673 Mainboard Software-Information Die im Mainboard-Paket enthaltene DVD enthält alle notwendigen Treiber. Um die Installation automatisch laufen zu lassen, klicken Sie einfach den Treiber oder Utiltiy und folgen Sie dem Pop-Up Schirm, um die Installation durchzuführen. Der Treibergebrauchs-DVD enthält: - Treibermenü : Es gibt die vorhandenen Treiber. Aktivieren Sie den gewünschten Treiber. - Gebrauchsmenü : Sie erlaubt Ihnen verfügbare Software-Anwendungen zu installieren.
Français P67A-C45/ P67A-C43/ P67S-C43/ P67A-S40 Séries Europe version
Carte mère MS-7673 Spécifications Processeurs Supportés ■ Intel® processeurs dans le paquet LGA1155 (Pour plus d'information sur le CPU, veuillez visiter http://www.msi.com/index. php?func=cpuform2) Horloge de base ■ 100 MHz Jeu de puces ■ Puces Intel® P67 Mémoire Supportée ■ 4 DDR3 DIMMs supportent DDR3 2133*(OC)/ 1600*(OC)/ 1333/ 1066 DRAM (16GB Max) ■ Supporte le mode double-canaux *(Pour plus d’information sur les composants compatibles, veuillez visiter http://www.msi.com/index.
Connecteurs Emplacements ■ 1 emplacement PCIE x16 ■ 3 emplacements PCIE x1 ■ 3 emplacements PCI Dimension ■ ATX (30.5 cm X 21.5 cm) Montage ■ 6 trous de montage * Si vous désirez acheter des accessoires et vous avez besoin de numéros des pièces, vous pouvez chercher sur la page website et trouver les détails sur notre adresse cidessous http://www.msi.com/index.php Fr-3 Français ■ Panneau arrière - 1 port combo clavier/ souris PS/2 - 8 ports USB 2.
Carte mère MS-7673 Guide Rapide Des Composants SYSFAN1, Fr-17 JPWR2, Fr-12 CPUFAN, Fr-17 CPU, Fr-6 DDR3, Fr-10 SYSFAN4, Fr-17 JCI1, Fr-22 Panneau arrière, Fr-13 BATT + JPWR1, Fr-12 PCIE, Fr-25 SATA1~6, Fr-16 JBAT1, Fr-24 PCI, Fr-26 JCOM1, Fr-17 SYSFAN2, Fr-17 SYSFAN3, Fr-17 JAUD1, Fr-19 JDLED3, Fr-22 JFP1, JFP2, Fr-18 JCD1, Fr-21 JSP1, Fr-20 JUSB2, Fr-19 J1394_1, Fr-20 JUSB1, Fr-18 JTPM1, Fr-21 Fr-4
Trous Taraudés Quand vous installez la carte mère, il faut déposer la carte dans le châssis en bonne position. La situation des trous taraudés sont montrée dans la figure ci-dessous. Face vers l’arrière, position pour la protège Entré/ Sortie du châssis. BATT + Français Trous taraudés Veuillez vous référer à la figure pour installer le support dans une position appropriée sur le châssis et puis de fixer la carte à travers les trous taraudés sur le support.
Carte mère MS-7673 Processeur : CPU Quand vous installez le CPU, veuillez vous assurer d’installer un ventilateur pour éviter la surchauffe. Si vous n’en avez pas, contactez votre revendeu pour en acheter et installez-les avant d’allumer votre ordinateur. Pour plus d’informations sur le CPU, veuillez visiter http://www.msi.com/index. php?func=cpuform2 Important Surchauffe La surchauffe endommage sérieusement l’unité centrale et le système.
Installation du CPU et son ventilateur Quand vous installez le CPU, assurez-vous que le CPU soit équipé d’un ventilateur de refroidissement attaché sur le dessus pour éviter la surchauffe. Méanmoins, n’oubliez pas d’appliquer une couche d’enduit thermique sur le CPU avant d’installer le ventilateur pour une meilleure dissipation de chaleur. Suivez les instruction suivantes pour installer le CPU et son ventilateur correctement. une faute installation peut endommager votre CPU et la carte mère. 2.
Carte mère MS-7673 5. Inspectez visuellement si le CPU est bien posé dans la douille. Sinon, sortez verticalement le CPU pur et la réinstallez. 6. Engagez le levier de charge en appuyant doucement sur le plaque de charge. Clé d’alignement 7. Sécurisez le levier à côté du bout de crochet sous l’onglet de rétention. 8. Assurez-vous que les quatre crochets sont dans la correcte position avant d’installer le ventilateur.
10. Appuyez sur les quatre crochets afin de fixer le ventilateur. 11. Retournez la carte mère pour assurer que le ventilateur est installé correctement. 12. Finalement, attachez le câble du ventilateur de CPU au connecteur du ventilateur de CPU sur la carte. Carte mère Crochet Important • Lisez le statut du CPU dans le BIOS. • Quand le CPU n’est pas installé, toujours protégez vos pins de la douille CPU avec le plastique de protection pour éviter tout dommage (Montré dans la Figure 1).
Carte mère MS-7673 Mémoire Ces slots DIMM sont destinés à installer les modules de mémoire. Pour plus d’informations sur les composants compatibles, veuillez visiter http://www.msi.com/index.php?func=testreport DDR3 240-pin, 1.5V 48x2=96 pin 72x2=144 pin Règle de population en mode double-canaux En mode de canaux-double, les modules de mémoire peuvent transmettre et recevoir les données avec simultanément deux lignes omnibus de données.
Installation des modules de mémoire 1. Le module de mémoire possède une seule encoche en son centre et ne s’adaptera que s’il est orienté de la mqnière convenable. 2. Insérez le module de mémoire à la verticale dans le slot du DIMM. Poussez-le ensuite jusqu’à l’extrémité dorée du module de mémoire, soit profondément insérée dans le slot du DIMM. Les clips en plastique situés de chaque côté du module va se fermer automatiquement. 3.
Carte mère MS-7673 Connecteurs d’alimentation Connecteur d’alimentation ATX 24-pin : JPWR1 Ce connecteur vous permet de connecter l’alimentation ATX 24-pin. Pour cela, assurez-vous que la prise d’alimentation est bien positionnée dans le bon sens et que les goupilles soient alignées. Enfoncez alors la prise dans le connecteur. Vous pourvez aussi utiliser un alimentation 20-pin selon vos besoins.
Panneau arrière Pour P67A-C45 Clavier/ Souris S/PDIF-Out Port IEEE 1394 optique LAN Ligne-In RS-Out Port USB 2.0 Ligne-Out CS-Out Mic Port USB 2.0 S/PDIF-Out Port USB 2.0 coaxial Bouton d’effacement CMOS Port USB 2.0 SS-Out Port USB 3.0 Pour P67A-C43 LAN S/PDIF-Out optique Ligne-In RS-Out Port USB 2.0 Ligne-Out CS-Out Mic Port USB 2.0 S/PDIF-Out Port USB 2.0 coaxial Bouton d’effacement CMOS Port USB 2.0 Pour P67S-C43 Clavier/ Souris SS-Out Port USB 3.
Carte mère MS-7673 ▶ Souris/Clavier Le standard connecteur de souris/clavier DIN de PS/2® est pour une souris ou un clavier de PS/2® . ▶ Bouton d’effacement CMOS (en option) Il y a un CMOS RAM intégré, qui possède un bloc d’alimentation alimenté par une batterie externe, destiné à conserver les données de configuration du système. Avec le CMOS RAM, le système peut lancer automatiquement le système d’exploitation chaque fois qu’il est allumé.
▶ LAN La prise standard RJ-45 LAN sert à la connexion au réseau local (Local Area Network (LAN)). Vous pouvez y relier un câble de réseau. Jaune Vert/ Orange LED Couleur LED Statut Condition Gauche Jaune Eteinte La connexion au réseau LAN n’est pas établie. Allumée (Stable) La connexion au réseau LAN est établie. Allumée (plus brillant et clignotante) L’ordinateur communique avec un autre ordinateur sur le réseau local LAN. Eteinte Un débit de 10 Mbits/sec est sélectionné.
Carte mère MS-7673 Connecteurs Connecteur Sérial ATA : SATA1~6 Ce connecteur est un port d’interface de série ATA haut débit. Chaque connecteur peut être relié à un appareil de série ATA. * Le schéma de carte mère dans la figure n’est qu’à titre de référence. SATA1_2 SATA3_4 SATA5 SATA1~2 (6 Gb/s) supportés par Intel® P67 SATA3~6 (3 Gb/s) supportés par Intel® P67 SATA6 Important Veuillez ne pas plier le câble de série ATA à 90°.
Connecteur d’alimentation du ventilateur : CPUFAN,SYSFAN1~4 Les connecteurs de courant du ventilateur supportent le ventilateur de refroidissement du système avec +12V. Lors du branchement des fils aux connecteurs, faites toujours en sorte que le fil rouge soit le fil positif devant être relié au connecteur +12V; et que le fil noir soit le fil de mise à la terre devant être relié au connecteur de mise à la terre GND.
Carte mère MS-7673 Connecteur panneau avant : JFP1, JFP2 Ce connecteur est fourni pour la connecxion électrique aux interrupteuts et LEDs du panneau avant. Le JFP1 est conforme au guide de conception de la connectivité Entrée/sortie du panneau avant Intel®. P o w e r in P o 8. + . .N 6 0 . 4 + . 2 e ch w it o w 1 S P Spe r r E D Buz zer 2 .+ 8 .6 .+ 4 L .- JFP2 D D in E LE P rL d o e n .N w e d 7 .Po sp n 5 Su rou . 3 .G 1 ch it w d e tS rv e D s E se e L e R D .R D 9 .+ H 7 .5 . 3 .
Connecteur USB 3.0 avant : JUSB2 Le port USB 3.0 est inférieur-compatible avec les périphériques USB 2.0. Il supporte le taux de transfert jusqu’à 5 Gbit/s (Super-Vitesse). 115V 1 N C D P C _ in V 4 _D DN P _ X 4 _ P o B _R X C D _ _ .N S 3 R 4 C 0 U B _ 2 .F S B3 nd X 4_ T 9 1 8.U S ou _ X 1 7.U r B3 _T 1 6.G S B3 nd 1 .U S u o 5 1 4.U r D1 + 1 3.G B D1 1 2.S B 1 1.S 1 2 N C D C _ P V 3 D DN _ X 3_ _ P B R X C D S _ R _ _ U B3 _ 3 C .F S 3 d X _ 1 .U SB un T 3 2 .U ro 3_ TX 3 .G SB 3_ d 4 .
Carte mère MS-7673 Connecteur S/PDIF-Out : JSP1 Ce connecteur sert à connecter l’interface S/PDIF (Sony & Philips Digital Interconnect Format) pour une transmission audio numérique. 115V d n u F ro DI .G P 1 .S CC 2 .V 3 * Le schéma de carte mère dans la figure n’est qu’à titre de référence. Support S/PDIF-Out (en option) Connecteur IEEE1394 : J1394_1 (en option) Ce connecteur vous permet de relier un appareil IEEE1394 via un support en option IEEE1394.
Connecteur de Module TPM : JTPM1 Ce connecteur est rélié à TPM (Trusted Platform Module) Module (en option). Veuillez vous référer au manuel de TPM plat-forme (en option) de sécurité pour plus de détails et d’utilisations. Français 3 in p 2 ta in a p 1 d ta pin 0 n e s & da ta pi m s & da ta a ra re s F d s & d C ad dre ss & P re s .L C d d s 3 P a d re 1 1.L C a dd et 1 .LP C a es k 9 .LP C R loc 7 .LP C C 5 .L P C 3 .LP 1 d n u nd r ro u n r e .G ro Pi we Q r ow 4 1 2 . G o P o IR w e y p 1 .
Carte mère MS-7673 Connecteur DLED3 : JDLED3 (en option) Cela est réservé pour la connexion d’une future carte de contrôle MSI. in p d n d u rve ro se d in p .G e n l in u p 3 1 .R o tro l in r 11 .G on tro l p o n 9 C tr . 7 .Co n B o 5 C S . 3 .5V 1 in p n l i o p tr l n n o o ntr n pi .C o Pi ol n 4 1 2.C o tr d pi n 1 .N on un l pi 0 1 .C ro tro l 8 .G n ro t 6 Co n . 4 .Co 2 Connecteur Châssis Intrusion : JCI1 Ce connecteur est connecté à un câble châssis intrusion switch.
Indicateur de statut LED (en option) BATT + Français CPU Power Phase LED (LED de phase d'alimentation du CPU) Ces LEDs indiquent le mode actuel de phase d'alimentation du CPU. Suivez les instructions ci-dessous pour le lire. Allumé Eteint Le CPU est au mode d'alimentation de phase 3. Le CPU est au mode d'alimentation de phase 4.
Carte mère MS-7673 Cavalier Cavalier d’effacement CMOS : JBAT1 Il y a un CMOS RAM intégré, qui possède un bloc d’alimentation alimenté par une batterie externe, destiné à conserver les données de configuration du système. Avec le CMOS RAM, le système peut lancer automatiquement le système d’exploitation chaque fois qu’il est allumé. Si vous souhaitez effacer la configuration du système, réglez le cavalier pour effacer les données.
Emplacements Emplacement PCIE (Peripheral Component Interconnect Express) L’emplacement PCIE supporte la carte d’extension d’Interface PCIE. Emplacement PCIE x16 Français Emplacment PCIE x1 Important Lorsque vous ajoutez ou retirez une carte d’extension, assurez-vous que le PC n’est pas relié au secteur. Lisez la documentation pour faire les configurations nécessaires du matériel ou du logiciel de la carte d’extension, tels que cavaliers, interrupteurs ou la configuration du BIOS.
Carte mère MS-7673 Emplacement PCI (Peripheral Component Interconnect) L’emplacement PCI supporte la carte LAN, la carte SCSI, la carte USB et d’autres cartes ajoutées qui sont compatibles avec les spécifications de PCI. Emplacement 32-bit PCI Important Lorsque vous ajoutez ou retirez une carte d’extension, assurez-vous que le PC n’est pas relié au secteur.
Réglage BIOS Ce chapitre donne des informations concernant le programme de réglage du BIOS et vous permet de configurer le système pour obtenir des performances d’utilisation optimum. Vous aurez peut-être besoin de lancer le programme de réglage lorsque : ■ Un message d’erreur apparaît sur l’écran pendant le démarrage du système, qui vous demande de lancer BIOS SETUP (Réglages). ■ Vous souhaitez changer les réglages par défaut des fonctions personnalisées.
Carte mère MS-7673 Contrôle Clavier Souris <↑ ↓ > Description Choisir un article Bouger le curseur Choisir une icône/ un domaine Cliquer/ Doublecliquer le bouton gauche Retourner au menu Exit ou revenir à la page précédente d’un sous-menu Cliquer le bouton droite <+> Augmenter la valeur numérique ou faire un changement <-> Diminuer la valeur numérique ou faire un changement Aide générale CPU Spécifications Entrer dans Memory-Z Charger les réglages optim
Menu principal Une fois entré dans l’unité de réglages BIOS CMOS, le menu principal apparaît sur l’écran. Le Menu Principal vous permet de sélectionner parmi les fonctions de réglages. Français ▶ Language Entrez dans le menu Setup, vous voyez un bouton “Language”. Veuillez cliquer ce bouton et choisir la langue selon vos souhaits, pour le réglage BIOS d’abord. ▶ Green Power Cliquez sur l’icône “Green Power” pour entrer dans le menu. Utilisez ce menu pour spécifier les phases d’alimentation.
Carte mère MS-7673 Quand vous entrez dans l’unité de réglages BIOS, suivez les procédures suivantes pour l’utilisation générale. 1. Load Optimized Defaults (Chargement des réglages optimisés par défaut) : Choisissez [Setting] -> [Save & Exit] -> [Restore Defaults] et cliquez. Puis apparaît un message sur l’écran comme ci-dessous. Choisissez [Yes] et cliquez afin de charger les réglages par défaut pour une performance optimale du système. 2.
4. OC Menu Introduction (Introduction du Menu OC) : Ce menu est pour des utilisations avancées destinées à overclocker la carte mère. Français ▶ Current CPU / DRAM Frequency Ces menus montrent la fréquence du CPU et de la mémoire. Lecture uniquement. ▶ CPU Base Frequency [10KHz] Cet article vous permet de régler l’horloge de base du CPU (en 10KHz). Vous pouvez overclocker le CPU en ajustant la valeur.Veuillez noter que le comportement d’overclocking n’est pas garanti.
Carte mère MS-7673 ▶ DRAM Ratio Ce réglage contrôle le ratio de fréquence mémoire pour permettra à la mémoire de fonctionner avec des combinaisons de différentes fréquences. ▶ Adjusted DRAM Frequency Il montre la fréquence ajustée de la DRAM. Lecture uniquement. ▶ Extreme Memory Profile(X.M.P) Cet article sert à activer/ désactiver le Intel Extreme Memory Profile (XMP). Pour plus d’information veuillez vous référer au site Internet officiel.
▶ tWTR L’intervalle de temps minimum entre la fin d’apparition d’écriture de données et le début de l’ordre de pré-charge. Permet au pont I/O de faire sur-fonctionner l’amplificateur sensitif avant qu’un ordre de lecture commence. ▶ tRRD Spécifie le retard active-à-active des différentes banques. ▶ tRTP L’intervalle de temps entre un ordre de lire et un ordre de pré-charge. ▶ tFAW Cet article sert à régler le timing tFAW (délai de quatre fenêtres activées).
Carte mère MS-7673 ▶ MEMORY-Z Appuyez sur pour entrer dans le sous-menu. ▶ DIMM1~4 Memory SPD Appuyez sur pour entrer dans le sous-menu. Le sous-menu affiche les informations de la mémoire installée. ▶ X.M.P Support Information Appuyez sur pour entrer dans le sous-menu. Ces articles affichent l’état actuel de l’information du support X.M.P. Lecture uniquement. ▶ CPU Feature Appuyez sur pour entrer dans le sous-menu.
▶ Intel Virtualization Tech Ce menu sert à activer/ désactiver l’Intel Virtualization Technologie. Pour plus d’informations veuillez vous référer au site officiel d’Intel. ▶ Power Technology Cet article vous permet de choisir le mode Intel Dynamic Power technologie. ▶ C1E Support Activer cet article pour lire la consommation d’énergie du CPU lors de l’arrêt. Pas tous les processeurs supportent Enhanced Halt state (C1E).
Carte mère MS-7673 Information Logiciel Sortez le DVD Pilote/ Service, qui est inclus dans la boîte de la carte mère et placez-le dans le DVD-ROM. L’installation va automatiquement se déclencher, cliquez sur le pilote ou sur l’utilitaire et suivez le pop-up de l’écran pour accomplir l’installation. Le DVD de Pilote/Service contient : - Menu Pilote : Il montre les pilotes disponibles. Installez le pilote si vous le souhaitez pour activer le dispositif.
Русский Серия P67A-C45/ P67A-C43/ P67S-C43/ P67A-S40 Europe version
MS-7673 Системная плата Характеристики Процессор ■ Процессор Intel® в конструктиве LGA1155 (Для получения самой новой информации о CPU, посетите сайт http://www.msi.com/index.php?func=cpuform2) Base Clock ■ 100 МГц Чипсет ■ Intel® P67 Память ■ 4 слота DDR3 DIMM поддерживают скорость DDR3 2133*(OC)/ 1600*(OC)/ 1333/ 1066 DRAM (16ГБ Max) ■ Поддержка двухканального режима *(За дополнительной информацией о совместимых компонентах посетите сайт http://www.msi.com/index.
Коннекторы Слоты ■ 1 слот PCIE x16 ■ 3 слота PCIE x1 ■ 3 слота PCI Форм Фактор ■ ATX (30.5 см X 21.5 см) Крепление ■ 6 отверстий для крепления * Помощь в приобретении дополнительных аксессуаров и поиске номера изделия можно найти по адресу http://www.msi.com/index.php Ru-3 Русский ■ Задней панели - 1 PS/2 combo порт клавиатуры/мыши - 8 портов USB 2.0 (для P67A-C45 / P67A-C43 / P67A-S40) 10 портов USB 2.
MS-7673 Системная плата Размещение компонентов системной платы SYSFAN1, Ru-17 JPWR2, Ru-12 CPUFAN, Ru-17 CPU, Ru-6 DDR3, Ru-10 SYSFAN4, Ru-17 JCI1, Ru-22 Задняя панель, Ru-13 BATT + JPWR1, Ru-12 PCIE, Ru-25 SATA1~6, Ru-16 JBAT1, Ru-24 PCI, Ru-26 JCOM1, Ru-17 SYSFAN2, Ru-17 SYSFAN3, Ru-17 JAUD1, Ru-19 JDLED3, Ru-22 JFP1, JFP2, Ru-18 JCD1, Ru-21 JSP1, Ru-20 JUSB2, Ru-19 J1394_1, Ru-20 JUSB1, Ru-18 JTPM1, Ru-21 Ru-4
Отверстия для винтов При установке системной платы нужно вставить её в корпус в правильном направлении. Размещения отверстий для винтов показаны ниже. BATT + Боковые стороны следует против заднего корпуса, размещение для протектора входа/ выхода корпуса. Русский Отверстия для винтов Следуйте указаниям выше указанно для установки держателей в правильном месте в корпусе и затем ввинтите винты через отверстия для винтов в держатели.
MS-7673 Системная плата CPU (Центральный процессор) При установке CPU, чтобы уберечь процессор от перегрева, не забудьте установить процессорный кулер. Если у вас нет процессорного кулера, пожалуйста, свяжитесь с дилером с целью приобретения и его установки до того, как включите компьютер. Последнюю информацию о поддержке процессоров можно получить на сайте http://www.msi.com/index.php?func=cpuform2 Внимание Перегрев Перегрев может серьёзно повредить центральный процессор.
Установка процессора и вентилятора Во избежание перегрева при работе обязательно установите вентилятор процессора. Одновременно, чтобы улучшить теплоотвод, убедитесь в том, что нанесён слой теплопроводящей пасты на процессоре перед установкой вентилятора. Следуйте данным указаниям для правильной установки. Неправильная установка приведет к повреждению процессора и системной платы. 2. Поднимите рычаг и откройте металлическую крышку для установки процессора. 3.
MS-7673 Системная плата 5. Визуально проверьте правильность установки процессора в разъем. Если процессор установлен неправильно, то выньте процессор и переустановите. 6. Опустите маталлическую крышку механизма крепления. Ключ для установки 7. Опустите рычаг на крышку механизма крепления и зафиксируйте его. 8. Перед установкой вентилятора убедитесь, что все четыре защелки правильно сориентированы. Внимание • Перед включением системы убедитесь, что вентилятор правильно установлен.
10. Нажмите на четыре защелки и закрепите вентилятор. 11. Переверните системную плату и убедитесь, что защелки надежно удерживают вентилятор. 12. По завершении подключите кабель вентилятора CPU к разъему на системной плате. Системная плата Защелка Внимание • Информацию об установленном процессоре смотрите в BIOS. • Если процессор не установлен, всегда закрывайте разъем пластиковой крышкой для предотвращения поломок и попадания в него грязи и пыли. (смотрите указание 1).
MS-7673 Системная плата Память Слоты DIMM используются для установки модулей памяти. За дополнительной информацией о совместимых компонентах обратитесь на сайт http://www.msi.com/index.php?func=testreport DDR3 240-конт, 1.5V 48x2=96 конт 72x2=144 конт Правила установки модулей памяти для работы в двухканальном режиме В двухканальном режиме модули памяти могут передавать и принимать данные по 2 шинам одновременно. При использовании двухканального режима производительность системы повышается.
Установка модулей памяти 1. Модули памяти имеют одну прорезь в средней части. Модуль войдет в разьем только при правильной ориентации. 2. Вставьте модуль в DIMM слот в вертикальном направлении. Затем нажмите на него, чтобы золоченые контакты глубоко погрузились в DIMM слот. Если модуль памяти вставлен правильно, то пластиковые защелки на обоих концах закроются автоматически. 3. Вручную убедитесь, что модуль закреплен в слоте DIMM защелками с обеих сторон.
MS-7673 Системная плата Разъем питания 24-контактный разъем питания ATX: JPWR1 Этот разъем позволяет подключить 24-контактный коннектор питания ATX. Для его подключения убедитесь, что коннектор и контакты разъема правильно сориентированы. Затем плотно вставьте его в разъем на системной плате. Вы также можете использовать 20-контактный ATX блок питания. При использовании 20-контактного разъема, подключайте его вдоль контактов 1 и 13. d n u ro V .G 5 V 4 2 3.+ +5 V d 2 2. 5 s n d 2 1.+ Re ou un d 2 0.
Задняя панель Для P67A-C45 Порт клавиатуры/ мыши Разъем оптический S/PDIF-Out Разъем LAN Порт IEEE 1394 Линейный RS-выход вход Порт USB 2.0 Линейный CS-выход выход Микрофон SS-выход Разъем Порт USB 2.0 коаксиальный S/PDIF-Out Кнопка очистки CMOS USB 2.0 Port Порт USB 2.0 Порт USB 3.0 Для P67A-C43 Разъем Порт клавиатуры/ оптический мыши S/PDIF-Out Разъем LAN Линейный RS-выход вход Порт USB 2.0 Микрофон SS-выход Разъем Порт USB 2.0 коаксиальный S/PDIF-Out Кнопка очистки CMOS Порт USB 2.
MS-7673 Системная плата ▶ Порт мыши/клавиатуры Стандартные разъемы DIN PS/2® для подключения мыши/клавиатуры с интерфейсом PS/2®. ▶ Кнопка очистки CMOS (опционально) На плате установлена CMOS память с питанием от батарейки, хранящая данные о конфигурации системы. Данные, хранящиеся в CMOS памяти, требуются компьютеру для загрузки операционной системы при включении. Если требуется очистить CMOS память и стереть данные о конфигурации системы, нажмите эту кнопку.
▶ Разъем LAN Стандартный разъем RJ-45 для подключения к локальной вычислительной сети (LAN). К нему подключается кабель локальной сети. Жёлт. LED Цвет Состояние LED Описание Лев. Жёлт. Нет LAN соединение не установлено. Есть(постоянно) LAN соединение установлено. Есть(ярче & мигает) Связь с другим компьютером по LAN. Нет Скорость передачи 10 Мб/с. Есть Скорость передачи 100 Мб/с. Есть Скорость передачи 1000 Мб/с. Прав. Зелён. Оранж. Зелён./ Оранж.
MS-7673 Системная плата Коннекторы Разъем Serial ATA: SATA1~6 Данный разъем является высокоскоростным портом интерфейса Serial ATA. Любой разъем Serial ATA может соединяться с одним устройством Serial ATA. * Компоненты системной платы в изображении только для справки. SATA1_2 SATA3_4 SATA5 SATA6 SATA1~2 (6 Гб/с) работают на чипсете Intel® P67 SATA3~6 (3 Гб/с) работают на чипсете Intel® P67 Внимание Избегайте, пожалуйста, резких изгибов кабеля Serial ATA.
Разъем питания вентиляторов: CPUFAN,SYSFAN1~4 Разъемы питания вентиляторов поддерживают вентиляторы с питанием +12В. При подключении необходимо помнить, что красный провод подключается к шине +12В, черный - к земле GND. Если на системной плате установлена микросхема аппаратного мониторинга, необходимо использовать специальные вентиляторы с датчиками скорости для реализации функции управления вентиляторами. d o n u /N ro 2V or .G 1 ns 1 + e . 2 .S 3 d n u ro 2V or l .G 1 s o 1 .+ en tr 2 .S on 3 .
MS-7673 Системная плата Коннекторы передней панели: JFP1, JFP2 Эти коннекторы используются для подключения кнопок и индикаторов, расположенных на передней панели корпуса. Коннектор JFP1 соответствует руководству Intel® Front Panel I/O Connectivity Design. P o w e r ake r r E zer D .+ 8 .6 .+ 4 L Buz 2 .- in P o 8. + . .N 6 0 . 4 + . 2 e ch w it o w 1 S P JFP2 D D in E LE P rL d o e n .N w e d 7 .Po sp n 5 Su rou . 3 .G 1 ch it w d e tS rv e D s E se e L e R D .R D 9 .+ H 7 .5 . 3 .
Разъем USB 3.0 передней панели: JUSB2 Порт USB 3.0 является обратно совместимым устройством с USB 2.0. Поддержка скорости передачи данных до 5 Gbit/s (SuperSpeed). 115V 1 N C D P C _ in V 4 _D DN P _ X 4 _ P o B _R X C D _ _ .N S 3 R 4 C 0 U B _ 2 .F S B3 nd X 4_ T 9 1 8.U S ou _ X 1 7.U r B3 _T 1 6.G S B3 nd 1 .U S u o 5 1 4.U r D1 + 1 3.G B D1 1 2.S B 1 1.S 1 2 N C D C _ P V 3 D DN _ X 3_ _ P B R X C D S _ R _ _ U B3 _ 3 C .F S 3 d X _ 1 .U SB un T 3 2 .U ro 3_ TX 3 .G SB 3_ d 4 .U B n 5 US rou 0. 6 .
MS-7673 Системная плата Разъем S/PDIF-Out: JSP1 Этот разъем используется для подключения интерфейса S/PDIF (Sony & Philips Digital Interconnect Format) для передачи звука в цифровом формате. 115V d n u F ro DI .G P 1 .S CC 2 .V 3 * Компоненты системной платы в изображении только для справки. Выносная планка S/PDIF-Out (опционально) Разъем IEEE1394: J1394_1 (опционально) Этот коннектор позволяет подключить порты IEEE1394 на опциональной выносной планке IEEE1394.
Разъем TPM Модуля: JTPM1 Данный разъем подключается к модулю TPM (Trusted Platform Module) (опционально). За более подробной информацией и назначениями обращайтесь к описанию модуля TPM. 3 in p 2 ta in a p 1 d ta pin 0 n e s & da ta pi m s & da ta a ra re s F d s & d C ad dre ss & P re s .L C d d s 3 P a d re 1 1.L C a dd et 1 .LP C a es k 9 .LP C R loc 7 .LP C C 5 .L P C 3 .LP 1 d n u nd r ro u n r e .G ro Pi we Q r ow 4 1 2 . G o P o IR w e y p 1 .N V ial o b 0 1 .5 er P nd 8 S 3V ta . 6 3. S . 4 .
MS-7673 Системная плата Разъем DLED3: JDLED3 (опционально) Этот разъем зарезервирован для подключения контрольной карты MSI в будущем. in p d n d u rve ro se d in p .G e n l in u p 3 1 .R o tro l in r 11 .G on tro l p o n 9 C tr . 7 .Co n B o 5 C S . 3 .5V 1 in p n l i o p tr l n n o o ntr n pi .C o Pi ol n 4 1 2.C o tr d pi n 1 .N on un l pi 0 1 .C ro tro l 8 .G n ro t 6 Co n . 4 .Co 2 Разъем датчика открывания корпуса: JCI1 К этому коннектору подключается кабель датчика, установленного в корпусе.
BATT + Световые индикаторы (опционально) Русский Индикатор фаз CPU (CPU Power Phase LED) Эти индикаторы показывают режим работы источника питания CPU. Информация о состоянии индикаторов приведена в таблице. ВКЛЮЧЕН ВЫКЛЮЧЕН CPU использует 3 фазы питания. CPU использует 4 фазы питания.
MS-7673 Системная плата Перемычки Перемычки очистки CMOS: JBAT1 На плате установлена CMOS память с питанием от батарейки, хранящая данные о конфигурации системы. С помощью памяти CMOS, система автоматически загружается каждый раз при включении. Если у вас возникает необходимость сбросить конфигурацию системы (очистить CMOS), воспользуйтесь этой перемычкой. 1 JBAT1 1 Хранение настроек 1 Сброс настроек Внимание Очистка CMOS производится соединением контактов 2-3 при отключенной системе.
Слоты Слот PCIE (Peripheral Component Interconnect Express) Слот PCIE поддерживает карты расширения интерфейса PCIE. PCIE x16 слот PCIE x1 слот Перед установкой или извлечением карт расширения убедитесь, что кабель питания отключен от электрической сети. Прочтите документацию на карту расширения и выполните необходимые аппаратные или програмные установки для данной платы, такие как перемычки, переключатели или конфигурацию BIOS.
MS-7673 Системная плата Слот PCI (Peripheral Component Interconnect) Слот PCI позволяет установить карты LAN, SCSI, USB и другие дополнительные карты расширения, которые соответствуют спецификации PCI. 32-bit PCI слот Внимание Перед установкой или извлечением карт расширения убедитесь, что кабель питания отключен от электрической сети.
Настройка BIOS В этой главе приводятся основные сведения о режиме настройки BIOS (BIOS SETUP), который позволяет установить оптимальную конфигурацию системы. Этот режим может потребоваться в следующих случаях: ■ Во время загрузки системы появляется сообщение об ошибке с требованием запустить BIOS SETUP. ■ В случае необходимости заменить заводские настройки на собственные. Внимание • Для улучшения производительности системы, BIOS постоянно обновляются.
MS-7673 Системная плата Контроль Клавиатура Мышь <↑ ↓ > Описание Выбор пункт Перемещение курсора Выбор значка/ области Щелчок/ Двойной щелчок левой кнопки Переход в меню Выход или возвращение к предыдущему пункту в подменю Щелчок правой кнопки <+> Увеличение числового значения или ведение изменений <-> Уменьшение числового значения или ведение изменений Подробная справка Спецификация CPU Вход в Memory-Z Установка оптимальных настроек Сохранить из
The Main Menu (Главное меню) При входе в режим настройки BIOS на экране отображается Главное меню. Главное меню позволяет выбрать следующие функций настроек. Русский ▶ Language Пункт меню, в котором можно изменить текущий язык BIOS. ▶ Green Power Пункт меню, в котором можно изменить настройки режимов энергосбережения. ▶ Utility Пункт меню, в котором находятся полезные программы для автоматического обновления BIOS и создания бэкапа HDD.
MS-7673 Системная плата Находясь в режиме настройки BIOS, рекомендуется выполнить следующие действия. 1. Load Optimized Defaults : Выберите пункт [Setting] -> [Save & Exit] -> [Restore Defaults]. На экране появится всплывающее сообщение как на картинке. Нажмите [Yes], чтобы загрузить настройки по умолчанию для оптимальной производительности системы. 2. Setup Date/ Time : Выберите пункт [Setting] -> [System Status] -> [System Date]/ [System Time]. Затем установите дату и время в соответствующих полях. 3.
4. Раздел OC Menu: Это меню предназначено для опытных пользователей и предоставляет возможности для разгона системы. ▶ CPU Base Frequency [10KHz] Этот пункт позволяет установить тактовую частоту Base clock CPU (в 10KHz). Изменение этого параметра обеспечивает возможность разгона CPU. Внимание, возможность успешного разгона не гарантируется.
MS-7673 Системная плата (Dynamically scale up, Speed-Step Down). Это новая технология Intel. ▶ DRAM Ratio Пункт управления cоотношением частот памяти. ▶ Adjusted DRAM Frequency Этот пункт показывает текущую частоту DRAM. Только для чтения. ▶ Extreme Memory Profile(X.M.P) Этот пункт позволяет включить/выключить Intel Extreme Memory Profile (XMP). За дополнительной информацией обращайтесь на официальный вебсайт Intel.
▶ tWTR Минимальная временная задержка между выполнением команды записи и началом команды считывания столбца. Позволяет системе ввода/вывода сбросить напряжения на усилителях считывания. ▶ tRRD Определяет задержку перехода от активного-к-активному состоянию для разных банков. ▶ tRTP Временный интервал между командами чтения и предзаряда. ▶ tFAW Этот пункт используется для установки таймингов tFAW (four activate window delay). ▶ tWCL Этот пункт используется для установки таймингов tWCL (Write CAS Latency).
MS-7673 Системная плата ▶ CPU Technology Support Нажмите для входа в подменю. В подменю показаны технологии, которые поддерживает установленый CPU. Только для чтения. ▶ MEMORY-Z Нажмите для входа в подменю. ▶ DIMM1~4 Memory SPD Нажмите для входа в подменю. Этот пункт показывает информацию об установленных модулях памяти. ▶ X.M.P Support Information Нажмите для входа в подменю. Эти пункты показывают текущее состояние и информацию о поддержке X.M.P. Только для чтения.
кода, что остановит распространение вредоносной программы. ▶ Intel Virtualization Tech Этот пункт используется для включения/выключения технологии Intel Virtualization. За дополнительной информацией смотрите оффициальный вебсайт Intel. ▶ Power Technology Этот пункт позволяет выбрать режим технологии Intel Dynamic Power. ▶ C1E Support Включите этот пункт для снижения энергопотребления CPU, когда он не работает. Не все процессоры поддерживают Enhanced Halt state (C1E).
MS-7673 Системная плата Сведения о программном обеспечении Установите в привод диск Driver/Utility (Драйверы и утилиты) из комплекта поставки системной платы. Автоматически запустится инсталляция. Нажмите на название драйвера/ утилиты и следуйте инструкциям на экране для завершения инсталляции. Диск Driver/Utility содержит: - Driver menu (Меню драйверов): Представляет перечень доступных драйверов. Установите драйверы для подключения необходимых устройств.