Instruction manual

User’s Guide
79
 Click the OK button to close the Bluetooth Con-
figuration Panel.
4. Determine the Bluetooth Device Address (BDA) of my hard-
ware device
In the Bluetooth Configuration Panel, on the Hardware tab, in
the Devices section, select the device you want to determine
the address of. In the Device Properties section of the dialog
box, the fourth entry, Device Address, is the BDA of the
selected Bluetooth device.
5. Determine the version of the Host Controller Interface (HCI)
In the Bluetooth Configuration Panel, on the Hardware tab, in
the Device Properties section, the fifth entry provides
Bluetooth Specification compliance information for the Host
Controller Interface.
The sixth entry contains the Specification Revision informa-
tion for the Host Controller Interface, if appropriate.
6. Determine the version of the Link Manager Protocol (LMP)
In the Bluetooth Configuration Panel, on the Hardware tab, in
the Device Properties section, the seventh entry provides
Link Manager Protocol version number information.
The eighth entry contains the Link Manager Protocol subver-
sion number information, if appropriate.
7. Find information about the Bluetooth hardware attached to