Instruction manual
Table Of Contents
78
PC2PC Bluetooth
3.5 Troubleshooting
1. Cannot connect to a paired device
Paired devices are always displayed in My Bluetooth Places,
even if the remote device is out of range or not powered up.
Verify that the remote member of the pair is within radio
range, and powered up, and then attempt the connection again.
2. Cannot discover services on an unpaired remote device
The remote device may not be powered up or may be out of
range.
Verify that the remote device is powered up.
Verify that the remote device is in Connectable mode
(Bluetooth Configuration Panel > Accessibility tab).
Perform a Search for Devices to verify that the de-
vice is within range.
3. Dial-up Networking service does not start
The Dial-up Networking service will not start unless a prop-
erly configured modem is attached to the server.
Verify that the modem is usable as a local device on
the computer to which it is attached.
In the Bluetooth Configuration Panel, Local Ser-
vices tab, double-click the Dial-up Networking
service:
Click the down arrow in the Modem field and select
the modem that will be used to dial out
Click the OK button