Instruction manual

32
PC2PC Bluetooth
Close an HID connection
Under normal circumstances, there is no reason to close an
HID connection; once established the connection is main-
tained automatically, even during the power off and power
on processes.
If, for some reason, the connection must be closed: from My
Bluetooth Places, right-click the service name and select
Disconnect.
When an HID connection is closed manually by the operator,
the connection’s “persistence” is broken. The connection
must be re-established manually, after which the connection
will again persist until broken manually.
Configure
No configuration is necessary.
* Audio Gateway
Overview
The Audio Gateway Application allows a remote Bluetooth
device to use this computer’s microphone and speakers as
the remote device’s audio input and output devices.
Open a connection to the Audio Gateway service that is
provided by another Bluetooth device using one of these
techniques:
 Windows system tray, Bluetooth icon
 From My Bluetooth Places
 Using the Bluetooth Setup Wizard