Instruction manual

User’s Guide
31
For example, the HID Application allows this computer to
use a Bluetooth keyboard and a Bluetooth mouse.
Create a Bluetooth HID connection
MSI Reminds You...
Some HIDs have multiple modes. Before establishing
a connection, be sure the HID is in the desired mode.
For example, in the case of an HID that can function
as both a mouse and a laser pointer, be sure the mode
switch is set to “Mouse” before attempting to connect.
Open a connection to a Bluetooth Human Interface Device
using one of these techniques:
 From My Bluetooth Places
 Using the Bluetooth Setup Wizard
Once an HID connection is established, that connection will
persist. If the computer is shut down, when the computer is
turned on again the connection will re-establish automatically.
MSI Reminds You...
HIDs usually have a button, which is sometimes diffi-
cult to find, that must be pressed before other Bluetooth
devices can locate the HID. Even after the button is
pressed, the HID can only be discovered for a limited
time, and then the button must be pressed again. The
time period can be as short as 30 seconds or as long as
180 seconds.
Read the documentation that accompanies the HID
before you attempt to connect to the device.