Instruction manual

User’s Guide
9
2.3 Hardware Installation
Remove the computer case.
1.
Install the transceiving module onto
your mainboard. Procedures may differ
depending on the location of the
bluetooth pinheader on the mainboard.
Please refer to the following:
2.
For mainboards with Bluetooth
pinheaders located near the PCI slots,
ex: MS-6398E, secure the connector
on the lower part of the transceiving
module directly onto the Bluetooth
pinheader. Then, fasten the
transceiving module to the mainboard
with a bracket screw.
For mainboards with Bluetooth
pinheaders located elsewhere (not near
the PCI slots), ex: MS-6380E, use the
linking cable to secure the identical
connector on the transceiving module
to the Bluetooth pinheader on the
mainboard. Then, fasten the
transceiving module to the mainboard
with a bracket screw.
2a. 2b.