Specifications

Chapter 6. Management setup 181
򐂰 The Input Power and Allocation tab shows charts and details of energy use
on the chassis. Figure 6-24 shows an example of one of
these charts.
Figure 6-24 Chassis power allocation window
򐂰 The Power History tab graphically shows historical power consumption at
selected intervals.
򐂰 You can use the Power Scheduling tab to configure schedules to power off or
on or power cycle one or more compute nodes based on location in the
chassis, serial number, or machine-type-model number.
Component IP configuration
This menu item lists all the components and IP configuration (if available) of
the chassis.
Chassis internal networking
This menu item shows the status of the internal network and permits
modifications. You can enable or disable the internal network here.